Epson WorkForce Pro WF-R5690 User Manual - Page 20
Remote GatewayTunnel Mode, Confirm Pre-Shared Key
View all Epson WorkForce Pro WF-R5690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Setting Local Port Remote Port Authentication Method Pre-Shared Key Encapsulation Remote Gateway(Tunnel Mode) Options/Description If you selected Port Number as the Method of Choosing Port option, and TCP or UDP for the Transport Protocol option, enter the port numbers that control receiving packets (up to 10 ports), separated by commas, for example 25,80,143,5220; leave this setting blank to control all ports; see the next table for more information If you selected Port Number as the Method of Choosing Port option, and TCP or UDP for the Transport Protocol option, enter the port numbers that control sending packets (up to 10 ports), separated by commas, for example 25,80,143,5220; leave this setting blank to control all ports; see the next table for more information If you selected IPsec as the Access Control option, select an authentication method here If you selected Pre-Shared Key as the Authentication Method option, enter a preshared key between 1 and 127 characters long here and in the Confirm Pre-Shared Key field If you selected IPsec as the Access Control option, select one of these encapsulation modes: Transport Mode, if you are using the product on the same LAN; IP packets of layer 4 or later are encrypted Tunnel Mode, if you are using the product on an Internet-capable network, such as IPsec-VPN; the header and data of IP packets are encrypted If you selected Tunnel Mode as the Encapsulation option, enter a gateway address between 1 and 39 characters long 20