Epson WorkForce Pro WP-4533 Start Here - Page 2

5 Close the front cover. 4 Slide the edge guides against the paper, but not too tight. Make sure the paper is under the tabs on the edge guides. The printer starts priming the ink. This takes about 12 minutes. When you see a confirmation message on the product's LCD screen, priming is complete. N ote: The included cartridges prime the printer and print about 1000 black pages/900 color pages. Actual page count will vary. C aution: Don't turn off the printer or open the cover while it is priming or you'll waste ink. 5 Load paper in the cassette You can load letter-, A4-, or legal-size plain paper in the cassette. For instructions on loading envelopes and special paper in the rear MP tray, see the online User's Guide. 1 Pull out the paper cassette. 5 Gently insert the paper cassette at the bottom of the printer. N ote: The paper may slide forward slightly as you insert the cassette. This is normal. 6 Extend the output tray and raise the paper stopper as shown. (Do not raise the paper stopper for legal-size paper.) 2 Slide the edge guides outward, and position them for the size of paper you are using. 6 Connect the fax line To fax, connect the included phone cord to a telephone wall jack and to the LINE port on the back of your product. To connect a telephone or answering machine, use the EXT. port on your product. See the online User's Guide for more details. N ote: If you are loading legal-size paper, extend the cassette as shown. 3 Insert the paper with the printable side facedown. Note: If you're connecting to a DSL phone line, you must use a DSL filter or you won't be able to fax. Contact your DSL provider for the necessary filter. N ote: Make sure the paper is loaded against the front edge guide and not sticking out from the end of the cassette.