Eureka AirExcel Compact 990A Owner's Guide - Page 7

How to use vacuum and accessories ! Never use vacuum without all filters in place. Empty dust cup after each use. Make sure vacuum is turned off before connecting or disconnecting hose, telescoping wand, or tool. ENGLISH When pulling out power cord, watch for a yellow line on cord. Continue pulling cord slowly; stop pulling when you see the red line! The red line indicates the end of usable cord. • Pull out cord to desired length (Fig. 1) and plug into electrical outlet. • Adjust floor nozzle brush lever. For hard floors, press lever down to extend brushes (Fig. 2). For carpeted floors, pull lever up to retract brushes. Fig. 1 • Step on power switch to turn on vacuum (Fig. 3). • To lengthen wand, push wand release button and pull to extend telescoping wand (Fig. 4). • For accessories, push tool onto end of wand or directly onto hose handle; twist to tighten (Fig. 5). • When vacuuming delicate surfaces such as drapes or picture frames, slide hose suction control to reduce suction (Fig. 6). Fig. 3 • When finished vacuuming, step on cord rewind switch to retract cord. Guide the cord with hand to be sure it does not whip around and cause damage. Crevice tool Use for baseboards, corners and furniture. Push crevice tool onto end of wand. Fig. 5 Fig. 2 Fig. 4 Dusting brush Use for furniture, drapes and vents. Push dusting brush onto end of wand (Fig. 5). Fig. 6 How to clear a blockage Make sure vacuum is turned off. Watch for sharp objects. • Pull floor nozzle off wand and check for blockage (Fig. 7). • Flex hose to clear any blockage (Fig. 8). Fig. 7 Eureka Customer Service HELPLINE 1-800-282-2886 Fig. 8 www.eureka.com 5