Eureka AirSpeed ONE AS2001TIS Quick Start Guide
Eureka AirSpeed ONE AS2001TIS Manual
 |
View all Eureka AirSpeed ONE AS2001TIS manuals
Add to My Manuals
Save this manual to your list of manuals |
Eureka AirSpeed ONE AS2001TIS manual content summary:
- Eureka AirSpeed ONE AS2001TIS | Quick Start Guide - Page 1
GUIDE For detailed vacuum information including FAQs please visit eureka.com or call the Customer Service www.eureka.com/airspeed/assembly, scan the QR code to the right, or contact our customer service helpline. reverse for Get Ready to Vacuum instructions www.eureka.com © 2013 Electrolux Home Care - Eureka AirSpeed ONE AS2001TIS | Quick Start Guide - Page 2
Get Ready To Vacuum To Vacuum Floors To vacuum floors, turn air path knob to 'floors.' Adjust height for carpet or bare floors. Step on foot graphic on hood and pull back on handle to recline vacuum. Step on power switch to turn on; step on again to turn off. If desired, route cord through cord
-
1 -
2
 |
 |
Hose Retainer
Note: Remove Crevice Tool (F) and
Extension Wand (G) from inside of
Backbone (B) hole before assembly.
C
B
A
B
© 2013 Electrolux Home Care Products, Inc. Printed in China PN 87469
www.eureka.com
QUICK START GUIDE
For detailed vacuum information including FAQs
please visit eureka.com or call the Customer
Service Helpline: 1-800-282-2886.
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
What’s In The Carton
Easy 4 Step Assembly
Dust Cup (D)
Hose (E)
Crevice Tool (F)
Extension Wand (G)
Turbo Nozzle (I)
Dusting Brush (H)
Base (A)
Handle (C)
Backbone (B)
AS2000-AS2039 Series
PLEASE READ FOR IMPORTANT TIPS ON ASSEMBLY
Fig 1:
With the backbone (B) loosely on the
base (A), rotate the backbone forward until
the vaccum is locked in the upright position.
Fig 2:
stand as shown and push down on
backbone (B) valve to snap into place. Pull up
to ensure the backbone has locked properly.
Align so that the hose retainer on the handle
(C) is facing the vacuum front. Lower the
handle (C) onto the backbone (B). Push
down to snap into place. Pull up to ensure
the handle has locked properly.
Put dust cup (D) into place on base. Push
cup handle toward backbone (B) to snap
into place.
To attach hose connector, align tabs and
lower hose onto connector. Turn clockwise
to lock.
STEP
STEP
STEP
STEP
STEP
STEP
STEP
STEP
1
2
3
4
5
2
3
4
To view our “How to Assemble” demo, visit
www.eureka.com/airspeed/assembly
,
scan the QR code to the right, or contact our customer service helpline.
See reverse for
Get Ready to Vacuum
instructions
Route hose (E) through
hose retainer on front of
handle (C).
Put hose end (E) into hook
at base of tool clips. Then
push hose into clips.
Slide crevice tool (F) into
top of extension wand end
(G). Place into clips on the
side of the vacuum.
Store dusting brush (H) on
back of vacuum.
On some models: Attach
turbo nozzle (I) to clip on
handle (C).
E
Hose
Retainer
E
C
G
H
I
Hose and Tool Storage
B
A
Alternate View
Fig. 1
Fig. 2
STEP
1
B
A