Eureka AirSpeed ONE Pet AS2030BA Owner's Guide - Page 6
Hose and Tool Storage
View all Eureka AirSpeed ONE Pet AS2030BA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Easy 4 Step Assembly To view our "How to Assemble" demo, visit www.eureka.com/airspeed/assembly STEP STEP STEP STEP 1 2 3 4 Fig. 1 B A Alternate View B A C Hose Retainer Fig. 2 B B A Fig 1: With the backbone (B) loosely on the base (A), rotate the backbone forward until the vaccum is locked in the upright position. Fig 2: stand as shown and push down on backbone (B) valve to snap into place. Pull up to ensure the backbone has locked properly. Align so that the hose retainer on the handle (C) is facing the vacuum front. Lower the handle (C) onto the backbone (B). Push down to snap into place. Pull up to ensure the handle has locked properly. Put dust cup (D) into place on base. Push cup handle toward backbone (B) to snap into place. To attach hose connector, align tabs and lower hose onto connector. Turn clock- wise to lock. Hose and Tool Storage C Hose Retainer E I G H E Route hose (E) through hose retainer on front of handle (C). Put hose end (E) into hook at base of tool clips. Then push hose into clips. Slide crevice tool (F) into top of extension wand end (G). Place into clips on the side of the vacuum. Store dusting brush (H) on back of vacuum. On some models: Attach turbo nozzle (I) to clip on handle (C).