Eureka Endeavor NLS 5400A Owner's Guide - Page 4

How to identify parts of vacuum cleaner Handle Hose Hose wand Screen Base hose Brush roll cover SPECIAL FEATURES Available on some models Turbo nozzle Dust cup latch Washable cup filter Dust cup Filter tube Chamber Height adjustment knob Hair Raiser self-cleaning brush Stair hose Nested crevice tool & extension wand Lower cord retainer Power switch Handle release Hose hook Upper cord retainer Dusting brush Carrying handle & cord wrap Hose connector Power cord Lower cord wrap Hose retainer Maintenance information Maintenance information is also located on back side of dust cup. ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using. EMPTY CUP AFTER EACH USE WASHABLE DUST CUP FILTER Washable Washable filter Screen Empty dust cup: Lift latch; remove cup. Pull bottom latch to release debris. Close lid until it clicks. 1) Pull filter latch to release dust cup cover. Lift out cup filter. Wash filter; allow to air dry thoroughly. Filter tube Filter cover 2) Lift out filter tube and screen. Shake 3) Align yellow marks on screen and off dust. Rinse; dry thoroughly. filter tube; drop into position. Reinstall cup filter. Close cover. Filters and screen must be in place for cover to lock. EXHAUST FILTER HF16 - Replace within 6 months Hepa filter HF16 U belt Brush roll – — ˜ ™ To replace HEPA filter: –Lift latch and remove dust cup. —Lift off clear filter cover. ˜Replace HEPA filter EF16. ™Reposition filter cover. šSnap dust cup back into place. HEPA filter cover must be in place at all times. BRUSH ROLL - Clean monthly U BELT - Replace worn, cut or out of shape belt 2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com