Eureka LightForce 300 4717AVZ Owner's Guide - Page 4

How to Identify Parts of Vacuum Cleaner Handle Hose Dust cup latch Filter screen & filter Dust cup Headlight (on some models) Height adjustment knob Brush roll cover SPECIAL FEATURES Available on some models Nested crevice tool & extension wand Duster chamber Lower cord retainer Power switch Handle release Belt view window Handle with Power Paw® Self-cleaning duster Upper cord retainer Hose hook Power cord Dusting brush Carrying handle & cord wrap Hose connector Lower cord wrap Hose retainer Maintenance Information Maintenance schedule is also located on back side of dust cup. ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using. DUST CUP - Empty after each use Screen Filter DCF 4/18 Pull up latch and Lift lever to release Close bottom lid remove dust cup. bottom lid. Debris will empty. until it clicks. FILTER & SCREEN - Check regularly, clean as needed Twist dust cup cover counter-clockwise. Grasp filter; turn clockwise. Remove screen and rinse. Dry thoroughly. Shake dust off filter. Rinse; dry thoroughly. Place screen over filter. Align 3 tabs with cover; turn counter-clockwise. FILTER DCF 4/18 - Replace within 6 months Brush Roll EXT-U Belt 2 Eureka Customer Service HELPLINE 1-800-282-2886 Remove filter. Place screen over new filter and install. Line up cover and lock. BRUSH ROLL - Clean monthly EXT-U BELT - Replace worn, cut or out of shape belt www.eureka.com