Eureka LightForce 300 4717AVZ Quick Start Guide - Page 1
Eureka LightForce 300 4717AVZ Manual
View all Eureka LightForce 300 4717AVZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
4710 Series QUICK START GUIDE Thank you for purchasing your new Eureka vacuum! Before returning, call Eureka Customer Service HELPLINE 1-800-282-2886 8 a.m. to 7:30 p.m. (CST), Monday - Friday 10 a.m. to 6:30 p.m. (CST), Saturday - Sunday www.eureka.com 1STEP 2STEP What's in the carton SPECIAL FEATURES Available on some models OWNER'S GUIDE REGISTRATION Dusting Brush Hose Retainer Tool Caddy Important Safeguards Hose Duster Chamber Handle with Power Paw® Power Paw® Vacuum Base Dust Cup and Filter 2 Long and 5 Short Screws Extension Handle Vacuum Back and Base Hose Wand and Crevice Tool Self-Cleaning Duster Stair Hose Easy assembly ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using. Slide vacuum back onto base. Fasten with one long screw. Push end of base hose into opening on vacuum base. Slide tool caddy onto back. Fasten with two short screws. Slide handle onto tool caddy. Fasten with one long screw. Use Phillips and flat-head screwdrivers. Attach hose to vacuum back. Attach hose retainer with one Fasten with two short screws. short screw. Pull retainer out to position hose. Pull up cord and push into lower cord retainer. Push cord into upper cord retainer. Place hose over hose hook on handle. For models without a duster, connect hose into lower base hose. Some models: Secure bottom of Push end of hose into duster duster chamber to hose retainer. chamber. Place duster in Tighten with flat-head screwdriver. chamber and snap into place. Place dust cup on base and snap into place. 3STEP Wrap cord. Place wand/crevice tool in holder on side of vacuum. Place dusting brush on back of handle. Some models: Snap Power Paw® into clip on front. Get ready to vacuum For accessories: Loosen lower end of hose from vacuum and attach tool. Step on power switch to turn on; step on again to turn off. Step on handle release to lower handle into position. If vacuum is hard to push, raise carpet setting. Lift latch to remove dust cup. Empty after each use. PROBLEM SOLVING Refer to Owner's Guide. MAINTENANCE SCHEDULE Refer to back of dust cup or Owner's Guide.