Eureka Maxima 4704RES Quick Start Guide

Eureka Maxima 4704RES Manual

Eureka Maxima 4704RES manual content summary:

  • Eureka Maxima 4704RES | Quick Start Guide - Page 1
    /12 4:39 PM Page 1 4700 Series QUICK START GUIDE Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this Quick Start Guide. If you have questions about your new vacuum, please contact our customer service helpline at 1-800-282
  • 1

What’s in the carton
STEP
1
1
Easy assembly
Slide vacuum back onto base.
Fasten with one long screw.
Slide tool caddy onto back.
Fasten with two short screws.
Slide handle onto tool caddy.
Fasten with one long screw.
Attach hose to vacuum back.
Fasten with two short screws.
STEP
2
2
Get ready to vacuum
Step on power switch to turn
on; step on again to turn off.
Step on handle release to
lower handle into position.
Adjust height for
carpet or bare floor.
Push cord into top cord
retainer. Plug into outlet.
For accessories: Loosen lower
end of hose and attach tool.
If vacuum is hard to push,
raise carpet setting.
Empty dust cup when debris
reaches line or after each use.
Some models: Use turbo nozzle
for furniture or stairs.
STEP
3
3
Use a Phillips
screwdriver.
PROBLEM SOLVING
Refer to Owner’s Guide.
MAINTENANCE SCHEDULE
Refer to back of dust cup or Owner’s Guide.
Attach hose retainer with one
short screw. Pull retainer out
to position hose.
Pull up cord and push into
lower cord retainer. Wrap cord.
Place hose over
hose hook on handle.
Push end of hose into
opening on vacuum base.
Place dust cup on base
and snap into place.
Place wand/crevice tool in holder
on side of vacuum
(crevice tool on some models).
Place dusting brush on
back of handle.
Some models: Snap
Turbo nozzle into clip on front.
Vacuum Base
Dust Cup
and Filter
Handle
Important Safeguards
Dusting
Brush
Hose
Retainer
Vacuum
Back
Tool Caddy
2 Long and
5 Short Screws
Hose
Extension
Wand
OWNER’S
GUIDE
Stair Hose
Crevice
Tool
SPECIAL FEATURES
Available on some models
Turbo Nozzle
Handle
with
Turbo
Nozzle
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts. Assemble the vacuum cleaner before using.
Thank you for purchasing your new Eureka vacuum!
4700 Series
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
If you have questions about your new vacuum,
please contact our customer service helpline at
1-800-282-2886
.
We’re here to help!
Important instructions
For easy assembly, please take a few
moments to read this Quick Start Guide.
QUICK START GUIDE
www.eureka.com
PN81156A_rev1LightspQS.qxp:front englsh
6/27/12
4:39 PM
Page 1