Eureka Maxima 4704RES Quick Start Guide - Page 1

Eureka Maxima 4704RES Manual

Page 1 highlights

PN81156A_rev1LightspQS.qxp:front englsh 6/27/12 4:39 PM Page 1 4700 Series QUICK START GUIDE Thank you for purchasing your new Eureka vacuum! Important instructions For easy assembly, please take a few moments to read this Quick Start Guide. If you have questions about your new vacuum, please contact our customer service helpline at 1-800-282-2886. We're here to help! www.eureka.com Helpline Hours: 8 a.m. to 7:30 p.m. (CST), Monday - Friday 10 a.m. to 6:30 p.m. (CST), Saturday - Sunday 1STEP 2STEP What's in the carton OWNER'S GUIDE Dusting Brush Hose Retainer Tool Caddy Hose SPECIAL FEATURES Available on some models Important Safeguards Stair Hose Vacuum Base Dust Cup and Filter Handle Easy assembly Vacuum Back 2 Long and 5 Short Screws Extension Wand Crevice Tool Handle with Turbo Nozzle Turbo Nozzle ! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts. Assemble the vacuum cleaner before using. Slide vacuum back onto base. Fasten with one long screw. Use a Phillips screwdriver. Slide tool caddy onto back. Fasten with two short screws. Slide handle onto tool caddy. Fasten with one long screw. Attach hose to vacuum back. Fasten with two short screws. Attach hose retainer with one Pull up cord and push into short screw. Pull retainer out lower cord retainer. Wrap cord. to position hose. Place hose over hose hook on handle. Push end of hose into opening on vacuum base. 3STEP Place dust cup on base and snap into place. Place wand/crevice tool in holder on side of vacuum (crevice tool on some models). Place dusting brush on back of handle. Get ready to vacuum Some models: Snap Turbo nozzle into clip on front. Adjust height for carpet or bare floor. Push cord into top cord retainer. Plug into outlet. Step on power switch to turn on; step on again to turn off. Step on handle release to lower handle into position. If vacuum is hard to push, raise carpet setting. Empty dust cup when debris For accessories: Loosen lower Some models: Use turbo nozzle reaches line or after each use. end of hose and attach tool. for furniture or stairs. PROBLEM SOLVING Refer to Owner's Guide. MAINTENANCE SCHEDULE Refer to back of dust cup or Owner's Guide.

  • 1

What’s in the carton
STEP
1
1
Easy assembly
Slide vacuum back onto base.
Fasten with one long screw.
Slide tool caddy onto back.
Fasten with two short screws.
Slide handle onto tool caddy.
Fasten with one long screw.
Attach hose to vacuum back.
Fasten with two short screws.
STEP
2
2
Get ready to vacuum
Step on power switch to turn
on; step on again to turn off.
Step on handle release to
lower handle into position.
Adjust height for
carpet or bare floor.
Push cord into top cord
retainer. Plug into outlet.
For accessories: Loosen lower
end of hose and attach tool.
If vacuum is hard to push,
raise carpet setting.
Empty dust cup when debris
reaches line or after each use.
Some models: Use turbo nozzle
for furniture or stairs.
STEP
3
3
Use a Phillips
screwdriver.
PROBLEM SOLVING
Refer to Owner’s Guide.
MAINTENANCE SCHEDULE
Refer to back of dust cup or Owner’s Guide.
Attach hose retainer with one
short screw. Pull retainer out
to position hose.
Pull up cord and push into
lower cord retainer. Wrap cord.
Place hose over
hose hook on handle.
Push end of hose into
opening on vacuum base.
Place dust cup on base
and snap into place.
Place wand/crevice tool in holder
on side of vacuum
(crevice tool on some models).
Place dusting brush on
back of handle.
Some models: Snap
Turbo nozzle into clip on front.
Vacuum Base
Dust Cup
and Filter
Handle
Important Safeguards
Dusting
Brush
Hose
Retainer
Vacuum
Back
Tool Caddy
2 Long and
5 Short Screws
Hose
Extension
Wand
OWNER’S
GUIDE
Stair Hose
Crevice
Tool
SPECIAL FEATURES
Available on some models
Turbo Nozzle
Handle
with
Turbo
Nozzle
!
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts. Assemble the vacuum cleaner before using.
Thank you for purchasing your new Eureka vacuum!
4700 Series
Helpline Hours:
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
If you have questions about your new vacuum,
please contact our customer service helpline at
1-800-282-2886
.
We’re here to help!
Important instructions
For easy assembly, please take a few
moments to read this Quick Start Guide.
QUICK START GUIDE
www.eureka.com
PN81156A_rev1LightspQS.qxp:front englsh
6/27/12
4:39 PM
Page 1