Fisher and Paykel CPV3-366-N User Guide - Page 10

Selecting and using burners BURNER USE 1 Identify the desired burner and the corresponding dial. Push the dial in and turn counterclockwise to LITE. Hold the dial at LITE before turning to a flame setting. 2 You should hear a clicking sound when setting to LITE. If no clicking sound is present, turn the dial back clockwise to OFF and refer to 'Troubleshooting' for advice. 3 When the burner is lit, turn the dial to any setting between HI (high) and SIM (simmer). When you have finished cooking, turn the dial clockwise back to OFF. 4 If you are using LP gas, there may be a slight extinction pop or flash at the flame spreader a few seconds after the burner has been turned off. This is normal. If the flame is extinguished during a power failure, turn the dial back to OFF as the burner will not automatically relight and gas may accumulate. 10