Fisher and Paykel DD60DCX7 QUICK START PH7 DES TXT AA US (English) - Page 2

After the wash, Dos and don'ts of loading, Preference options, For more info - dishwasher

Page 2 highlights

After the wash The dishwasher will beep six times to indicate the end of the wash program. You may notice the following noises at the end of the wash. These are all part of normal operation: In double models, both drawers may be draining simultaneously. The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan assists with drying and uses negligible amounts of energy. For best drying results, we recommend unloading the dishes once they have cooled. Dos and don'ts of loading Sharp or pointed items must be placed horizontally or with sharp edges/points facing down to avoid risk of injury. Protruding items will stop the internal lid of the drawer from sealing properly, which could result in a service call. A neatly arranged load with evenly spaced dishes helps wash performance. Overcrowding reduces wash performance. Ensure there is enough space between plates. Mix spoons, knives and forks within the cutlery basket to prevent them from nesting. Ensure that water reaches all items on the adjustable racks. If plates and cutlery are nesting, they are less likely to be cleaned well. Dishware is blocking water from reaching items on the adjustable racks. Preference options You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable settings before you start using your dishwasher. Option Rinse aid Water softener* Open drawer auto power-on What does it do? Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash. Increase this setting if dishes are wet or streaky after a wash. Refer to the 'Water softener' section of the 'User guide' for details. Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the drawer. You can turn this setting off. How to change the setting of an option Beeps at end of wash Closed drawer autolock Your dishwasher is When this setting is on, factory-set to beep the drawer will six times at the end automatically lock 30 of a wash. You can seconds after it's closed. turn this setting off. It can then be unlocked by pressing (unless Keylock or Childlock is also activated). Useful in boats or motor homes. 1 CHECK & OPEN Check that there is no wash underway, press , then open the drawer. 2 ENTER MENU & SCROLL TO OPTION To enter the menu: press the selector on top first with one finger, then the button on the front with another finger, hold both until one long beep sounds, then release. You are now in the Rinse aid option of the preference options menu. If you want to change the Rinse aid setting, go to step 3 now. If you want to change the setting of another option, you will need to scroll to that option first. To scroll to the next option: press . To know which option you're in, watch the lights above and (see table below). When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone). Option Which option am I in? Rinse aid red unlit Water softener* blue unlit Open drawer auto power-on purple red Beeps at end of wash blue red Closed drawer autolock red red Possible settings 1 to 5 0 to 5 On or Off On or Off On or Off On Example 4 indicators lit = setting is 4 Off 3 CHANGE SETTING Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2, you need to press 3 times. 4 SAVE SETTING & QUIT MENU Press . This will save the new setting and quit the preference options menu. *This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted. For more info For detailed information on the features of your dishwasher For warranty information If you... have any questions or comments need a Fisher & Paykel authorized technician to service your product need replacement parts or accessories want to register your product see your 'User guide' see your 'Service and warranty' booklet see your 'Service and warranty' booklet or contact us NZ toll-free, 24/7 AU toll-free, 24/7 USA toll-free, 24/7 CA toll-free, 24/7 0800 372 273 1300 650 590 1 888 936 7872 1 888 936 7872 www.fisherpaykel.co.nz www.fisherpaykel.com.au www.fisherpaykel.com www.fisherpaykel.ca 590189B 09.12

  • 1
  • 2

After the wash
Dos and don’ts of loading
Preference options
For more info
The dishwasher will beep six times to indicate the end of the wash program.
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened. The fan
assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Sharp
or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
Overcrowding reduces wash
performance.
Protruding items will stop the
internal lid of the drawer from
sealing properly, which could result
in a service call.
Ensure there is enough space between
plates.
Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
If plates and cutlery are
nesting,
they are less likely to be cleaned
well.
Ensure that water reaches all items on
the adjustable racks.
Dishware is blocking water from
reaching items on the adjustable
racks.
For detailed information on the
features of your dishwasher
For warranty information
If you…
have any questions or comments
need a Fisher & Paykel authorized
technician to service your product
need replacement parts or accessories
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
NZ
toll-free, 24/7
0800 372 273
www.fisherpaykel.co.nz
AU
toll-free, 24/7
1300 650 590
www.fisherpaykel.com.au
USA
toll-free, 24/7
1 888 936 7872
www.fisherpaykel.com
CA
toll-free, 24/7
1 888 936 7872
www.fisherpaykel.ca
Option
Rinse aid
Water softener*
Open drawer auto
power-on
Beeps at end of
wash
Closed drawer autolock
What does
it do?
Regulates the amount
of rinse aid dispensed.
Reduce this setting if
there is excess foam
after a wash. Increase
this setting if dishes are
wet or streaky after a
wash.
Refer to the
‘Water softener’
section of the
‘User guide’ for
details.
Your dishwasher is
factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer.
You can turn this
setting off.
Your dishwasher is
factory-set to beep
six times at the end
of a wash. You can
turn this setting off.
When this setting is on,
the drawer will
automatically lock 30
seconds after it’s closed.
It can then be unlocked
by pressing
(unless
Keylock or Childlock is also
activated). Useful in boats
or motor homes.
How to change the setting of an option
1
CHECK & OPEN
Check that there is no wash underway, press
, then open the drawer.
2
ENTER MENU & SCROLL TO OPTION
To enter the menu:
press the
selector on top first with one finger, then the
button on the front with another finger, hold both
until one long beep sounds, then release.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option:
press
. To know which option you’re in, watch the lights above
and
(see table below). When
you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
3
CHANGE SETTING
Press
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press
3 times.
4
SAVE SETTING & QUIT MENU
Press
. This will save the new setting and quit the preference options menu.
*This option is disabled on models without water softener. It appears in the sequence of options but cannot be adjusted.
Option
Rinse aid
Water softener*
Open drawer auto
power-on
Beeps at end of wash
Closed drawer
autolock
Which option
am I in?
Possible settings
1 to 5
0 to 5
On or Off
On or Off
On or Off
Example
red
unlit
blue
unlit
purple
red
blue
red
red
red
4 indicators lit = setting is 4
On
Off
590189B
09.12