Fisher and Paykel GWL11 User Guide - Page 20
Water Levels - manual
View all Fisher and Paykel GWL11 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Wash Cycles and Options Water Levels Auto Water Level Your Ecosmart can automatically select the appropriate water level for the load. 1. Place your clothes in the machine, and press Power. 2. Select wash cycle (select Auto water level if not automatically selected) 3. Press START/PAUSE During fill the machine will pause occasionally to sense the water level. The machine will check if the water level is correct by using a series of two different agitate strokes. (This may take over a minute). If it detects that the water level is not enough, it will fill with more water and re-check the level. When washing an unusual load eg. large bulky garments, pillows, we recommend you manually select the water level and select the Delicate cycle. Manually select the water level if there is already water in the machine. For a large bulky load, or large single item (eg. comforter) push the load down after the first fill. Manual Water Level Selection The agitator has five levels marked on its stem that can be used to help you select the correct water levels. Select the correct water level by using the mark nearest to the top of the clothes. The levels marked on the agitator do not correspond exactly to the level of water. They indicate the level of dry clothes suitable for the water level. Your Ecosmart may occasionally add water during agitation. This is to maintain the water level due to the release of air trapped in the garments. Out of balance loads, tangling or splashover can be caused by selecting a water level that is too high. 20