Fisher and Paykel OR30SDG4X1 Installation Guide - Page 27
Final Checklist
View all Fisher and Paykel OR30SDG4X1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
@0 FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER GENERAL Placement of unit. Specified clearance maintained to cabinet surfaces. Unit Level - front to back, side to side. All packaging material and tie straps removed. Island trim or optional backguard correctly attached. The anti-tip bracket is correctly installed. ELECTRICAL Adequate ground connection. GAS SUPPLY Site gas supply is compatible with range model, and sufficient pressure is available (see section 'Gas connection'). The pressure regulator is connected and correctly set for 4.0" (101.6mm) W.C.P. for NATURAL gas or 11.0" (279.4mm) W.C.P. for LP/PROPANE gas. Manual gas shut-off valve installed in an accessible location. Unit tested and free of gas leaks. OPERATION All internal packing materials removed. Check below the cooktop grates and inside the oven. If used on LP gas, verify that the pressure regulator, cooktop burner injectors and oven burner injectors (Gas Gas models only) have been set for use with LP gas. Dials turn correctly and freely. Each burner lights satisfactorily, both individually and with other burners operating at the same time. Oven ignition can be achieved (Gas gas models only) Oven door hinges seated and door opens and closes properly. Cooktop grates are correctly positioned, level, and do not rock. Cooktop burner flame correct. Complete and keep for safe reference: Model Serial No. Purchase Date Purchaser Dealer Address Installer's Name Installer's Signature Installation Company Installation Date F I S H E R PAY K E L .C O M Copyright © Fisher & Paykel Appliances 2018. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available.