Fluke 1555 Fluke 1555 / 1550C Insulation Resistance Tester Product Datasheet - Page 2

Specifications Electrical specifications The tester's accuracy is specified for one year after calibration at operating temperatures of 0 °C to 35 °C. For operating temperatures outside the range (-20 °C to 0 °C and 35 °C to 50 °C), add ± .25 % per °C, except on the 20 % bands add ± 1 % per °C. Insulation resistance measurement Test voltage (dc) Range Accuracy (± reading) 250 V 500 V 1000 V 2500 V 5000 V 10000 V (1555 Only) < 200 kΩ 200 kΩ to 5 GΩ 5 GΩ to 50 GΩ > 50 GΩ < 200 kΩ 200 kΩ to 10 GΩ 10 GΩ to 100 GΩ > 100 GΩ < 200 kΩ 200 kΩ to 20 GΩ 20 GΩ to 200 GΩ > 200 GΩ < 200 kΩ 200 kΩ to 50 GΩ 50 GΩ to 500 GΩ > 500 GΩ < 200 kΩ 200 kΩ to 100 GΩ 100 GΩ to 1 TΩ > 1 TΩ < 200 kΩ 200 kΩ to 200 GΩ 200 GΩ to 2 TΩ > 2 TΩ unspecified 5 % 20 % unspecified unspecified 5 % 20 % unspecified unspecified 5 % 20 % unspecified unspecified 5 % 20 % unspecified unspecified 5 % 20 % unspecified unspecified 5 % 20 % unspecified Bar graph range Insulation test voltage accuracy Induced ac mains current rejection Charging rate for capacitive load Discharge rate for capacitive load 0 to 1 TΩ -0 %, +10 % at 1 mA load current 2 mA maximum 5 seconds per μF 1.5 s/μF Leakage current measurement Capacitance measurement Range 1 nA to 2 mA 0.01 uF to 15.00 μF Accuracy ± (5 % + 2 nA) ± (15 % rdg + 0.03 μF) Timer Range 0 to 99 minutes Resolution Setting: 1 minute Indication: 1 second Live circuit warning Warning range Voltage accuracy 30 V to 660 V ac/dc, 50/60 Hz ± (15 % + 2 V) General specifications Display 75 mm x 105 mm Power 12 V lead-acid rechargeable battery, Yuasa NP2.8-12 Charger Input (AC) 85 V ac 50/60 Hz 20 VA This Class II (double insulated) instrument is supplied with a Class 1 (grounded) power cord. The protective earth terminal (ground pin) is not connected internally. The extra pin is for added plug retention only. Dimensions 269 mm x 277 mm x 160 mm (10.6 in x 10.9 in x 6.3 in) Weight 3.7 kg (8.2 lb) Temperature (operating) -20 ºC to 50 ºC (-4 ºF to 122 ºF) Temperature (storage) -20 ºC to 65 ºC (-4 ºF to 149 ºF) Humidity 80 % to 31 ºC decreasing linearly to 50 % at 50 ºC Altitude 2000 m Enclosure sealing IP40 Input overload protection 1000 V ac Electromagnetic compatibility EN 61326 Certifications Safety compliance Polution degree EN 61010, EN 61557 Parts 1 and 2, IEC 61010-1, CAT III 1000 V, CAT IV 600 V 2 2 Fluke Corporation Fluke 1555 and 1550C Insulation Resistance Testers Software specifications Fluke ViewForms basic software requires a PC running Windows 2000, Windows XP and Windows Vista. Included accessories Test Cables with Alligator Clips (red, black, green) Infrared adapter with interface cable FlukeView Forms Basic CD-ROM AC Power Cord Soft Carrying Case (base models only) English Manual Users Manual on CD-ROM Quick Reference Card Software License Agreement Registration Card FlukeView Forms Installation Guide USB-IR Cable Installation Guide IP67 Hard Case (kit only) Certificate of Calibration (kit only) Ruggedized Alligator Clips (kit and 1555 only) Ordering information 1550C 5 kV Insulation Tester 1555 10 kV Insulation Tester 1550C/Kit 5 kV Insulation Tester Kit 1555/Kit 10 kV Insulation Tester Kit Optional accessories TL1550EXT 25 foot extended test lead set Optimum Energy Products Ltd. 1.877.766.5412 [email protected] www.MyFlukeStore.com