Fluke 772 Fluke 772 and 773 Milliamp Process Clamp Meter Datasheet - Page 1
Fluke 772 Manual
View all Fluke 772 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Fluke 772 and 773 Milliamp Process Clamp Meters Technical Data Get more time. Use the Fluke 772 and 773 to: • Measure 4 to 20 mA signals without "breaking the loop" just like the innovative and popular Fluke 771 Process Milliamp Clampmeter • Source 4 to 20 mA signals for testing control system I/O or I/Ps • Simulate 4 to 20 mA signals for testing control system I/O • Measure 4 to 20 mA signals with in-circuit measurement • Simultaneously measure mA in-circuit with 24 V loop power for powering and testing transmitters • Source mA output signals in a linear ramp or 25 % step output - Automatically change the 4 to 20 mA output for remote testing • Power saving features, auto-off, backlight timeout extend battery life Fluke 773 features: • DC voltage measurement to verify 24 V power supplies or voltage I/O signals • Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp - Output mA signal enables a logging DMM or other device to record the 4 to 20 mA signal without breaking the loop • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal - Apply a mA input signal to a device and measure its' 4 to 20 mA output on devices such as valves or mA isolators • Voltage output linear ramp or 25 % step output - Automatically change the voltage output for remote testing