Fluke TI480 Safety Information - Page 2
Do not put metal objects into connectors.
View all Fluke TI480 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
See emissivity information for actual temperatures. Reflective objects result in lower than actual temperature measurements. These objects pose a burn hazard. Do not put battery cells and battery packs near heat or fire. Do not put in sunlight. Do not disassemble or crush battery cells and battery packs. Remove batteries to prevent battery leakage and damage to the Product if it is not used for an extended period. Connect the battery charger to the mains power outlet before the charger. Use only Fluke approved power adapters to charge the battery. Keep cells and battery packs clean and dry. Clean dirty connectors with a dry, clean cloth. Batteries contain hazardous chemicals that can cause burns or explode. If exposure to chemicals occurs, clean with water and get medical aid. Do not disassemble the battery. Repair the Product before use if the battery leaks. Use only the external mains power supply included with the Product. Do not put metal objects into connectors. Use only specified replacement parts. Have an approved technician repair the Product. Remove the batteries if the Product is not used for an extended period of time, or if stored in temperatures above 50 C. If the batteries are not removed, battery leakage can damage the Product. Disconnect the battery charger and move the Product or battery to a cool, non-flammable location if the rechargeable battery becomes hot (50 C) during the charge period.