Foxconn 45CSX English Manual. - Page 17
Front Panel Connector : FP1, Serial ATA Connectors : SATA_1/2, IrDA Connector : IR - sleep
View all Foxconn 45CSX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2 Front Panel Connector : FP1 This motherboard includes one connector for connecting the front panel switch and LED Indicators. 1 + HDD-LED - 2 + PWR-LED - Hard Disk LED Connector (HDD-LED) RESET-SW PWR-SW Connect to the chassis front panel IDE indicator LED. It indicates the active status of the hard disks. This 2-pin connector is directional with +/- sign. NC EMPTY 9 10 FP1 Reset Switch (RESET-SW) Attach the connector to the Reset switch on the front panel of the case; the system will restart when the switch is pressed. Power LED Connector (PWR-LED) Connect to the power LED indicator on the front panel of the chassis. The Power LED indicates the system's status. When the system is in operation (S0 status), the LED is on. When the system gets into sleep mode (S1) , the LED is blinking; When the system is in S3/S4 sleep state or power off mode (S5), the LED is off. This 2-pin connector is directional with +/- sign. Power Switch Connector (PWR-SW) Connect to the power button on the front panel of the chassis. Push this switch allows the system to be turned on and off rather than using the power supply button. Serial ATA Connectors : SATA_1/2 1 GND The Serial ATA connector is used to connect with SATA Hard TX+ TX- Disk or CD devices which supporting this feature. The current GND Serial ATA II interface allows up to 300MB/s data transfer RX- RX+ rate. GND SATA _1/2 IrDA Connector : IR This connector supports infrared wireless transmitting and receiving device. 1 2 3 4 5 IR +5V EMPTY IRRX GND IRTX 10