Foxconn Destroyer English Manual. - Page 99
There are two drivers, all these two drivers must be installed. Press [Enter] to select
View all Foxconn Destroyer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
5 7. There are two drivers, all these two drivers must be installed. Press [Enter] to select the first driver - "NVIDIA RAID Driver (required)". Windows Setup You have chosen to configure a SCSI Adapter for use with Windows, using a device support disk provided by an adapter manufacturer. Select the SCSI Adapter you want from the following list, or press ESC to return to the previous screen. NVIDIA RAID Driver (required) NVIDIA nForce Storage Controller (required) ENTER=Select F3=Exit 8. A confirmation message appears to double check if the driver is really what we wanted. As we need to install both two drivers, so we will press [S] again to select the second driver. It will ask you to insert the RAID driver diskette into your floppy drive again, press [Enter] to continue. Windows Setup Setup will load support for the following mass storage device(s): NVIDIA RAID Driver (required) * To specify additional SCSI adapters, CD-ROM drivers, or special disk controllers for use with Windows, including those for which you have a device support disk from a mass storage device manufacturer, press S. * If you do not have any device support disks from a mass storage device manufacturer, or do not want to specify additional mass storage devices for use with Windows, press ENTER. S=Specify Additional Device ENTER=Continue F3=Exit 92