Foxconn G41AP English Manual. - Page 42

3 SuperIO Configuration CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc. SuperIO Configuration SuperIO Configuration Help Item EuP Function [Ena bled] S1/S3/S4 is normal, OnBoard Floppy Controller [Enabled] S5 wake up only by press- Serial Port1 Address [3F8/IRQ4] ing the power button. Serial Port1 Mode [Normal] Serial Port2 Address [2F8/IRQ3] Serial Port2 Mode [Normal] Parallel Port Address [378] Parallel Port Mode [Normal] Parallel Port IRQ [IRQ7] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► EuP Function This item is used to enable/disable the EuP(Energy-using Products) feature. When enable, the suspend power of the chipset will be cut off in S5 suspend mode in order to reduce the power consumption of motherboard. Enable: S1/S3/S4 is normal, S5 wake up only by pressing the power button. Disable: Normal ACPI function. ► OnBoard Floppy Controller This item is used to enable/disable Floppy Controller. ► Serial Port1 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 1. ► Serial Port1 Mode This item enables you to determine the transfer mode of the serial port 1. ► Serial Port2 Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial port 2. ► Serial Port2 Mode This item enables you to determine the transfer mode of the serial port 2. ►Parallel Port Address This item is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel port. ►Parallel Port Mode This item is used to set paraller port mode. ► Parallel Port IRQ This item is used to assign the interrupt request (IRQ) for the onboard parallel port . 35