Foxconn H61M-S User manual - Page 35
Performance Tuning, ► CPU Configuration/North Bridge Configuration
View all Foxconn H61M-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
► CPU C6 state This item is used to enable or disable CPU C6 state to OS. ► Package C State limit It is used to select the C-State mode. ► Hyper-Threading This item is used to enable or disable the Hyper-Threading Technology feature. Performance Tuning Aptio Setup Utility - C opyright (C) 2011 American Megatrends, Inc. F-Center ▶ CPU Configuration ▶ North Bridge Configuration CPU Configuration 3 CAUTION → ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc. ► CPU Configuration/North Bridge Configuration Press to go to relative submenu. CPU Configuration ► EIST You can select the EIST (Processor Power Management, PPM) through this item. ► Turbo Mode Turbo mode allows processor cores to run faster than its marked frequency in specific condition. It appears only when the "EIST" is enabled. ► iGFX Core Current Max (1/8 Amp) This item is used to set the iGFX Core Current Max. You can use [+] or [-] to adjust the value. The setting value:0-65535 ! Enhanced Intel SpeedStep® technology (EIST) allows the system to dynamically adjust processor voltage and core frequency, which can result in decreased average power consumption and decreased average heat production. There are some system requirements must be met, including CPU, chipset, motherboard, BIOS and operation system. Please refer to Intel Website for more information. 28