Foxconn M61PMV RAID Manual. - Page 14

RAID Enable in BIOS, 3 Select a RAID Array for Use

Get Foxconn M61PMV PDF manuals and user guides View all Foxconn M61PMV manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

5-2 RAID Enable in BIOS 1. Enter the BIOS setup by pressing [DEL] key when boot up. 2. Select the "Integrated Peripherals" from the "Main menu", then select the "RAID Config" menu and press [Enter] to go to the configuration items. 3. Enable RAID function and individual SATA port for hard drive or DVD connection. 4. Press [F10] to save the setting then PC will reboot itself. Phoenix - AwardBIOS CMOS Setup Utility RAID Config RAID Enable SATA Pri-Master RAID SATA Pri-Slave RAID SATA Sec-Master RAID SATA Sec-Slave RAID [EnabIlDedE] Item Help [Enabled] [Enabled] Menu Level ► [Enabled] [Enabled] 5 Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults 5-3 Select a RAID Array for Use When BIOS is restarted, it will display a message asking you to press [F10] key to enter the main menu of MediaShield BIOS. Press [F10], the screen appears. At the bottom of each screen displayed, there is one line listing each key's function, such as [Tab], [Enter], [ESC]...etc. It is helpful to make your choice easier. MediaShield BIOS Apr 26 2007 - Define a New Array - RAID Mode: Mirroriendg Stripe Block: Optimal Free Disks Port Disk Model Capacity Array Disks Port Disk Model Capacity 01..00 WWDDCC WWDD11220000JJDD--99 111111..7799GGBB 1.1 Hitachi HDT725 232.88GB 2.0 HDS 72808 0PLA3 8 76.69GB 2.1 ST3320620AS 298.09GB [-›] Add [‹-] Del [ESC] Quit [F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [Enter] Popup 

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
5
9
5-2 RAID Enable in BIOS
1. Enter the BIOS setup by pressing [DEL] key when boot up.
2. Select the “Integrated Peripherals” from the “Main menu”, then select the
“RAID
Config” menu and press [Enter] to go to the configuration items.
3. Enable RAID function and individual SATA port for hard drive or DVD connection.
4. Press [F10] to save the setting then PC will reboot itself.
5-3 Select a RAID Array for Use
When BIOS is restarted, it will display a message asking you to press [F10] key to
enter the main menu of MediaShield BIOS. Press [F10], the screen appears.
At the bottom of each screen displayed, there is one line listing each key’s function,
such as [Tab], [Enter], [ESC]...etc. It is helpful to make your choice easier.
MediaShield BIOS
Apr 26 2007
- Define a New Array -
RAID Mode: Mirrored
Stripe Block:
Free Disks
Array Disks
Port
Disk Model
Capacity
Port Disk Model
Capacity
[-›] Add
[‹-] Del
[ESC] Quit
[F6] Back
[F7] Finish
[TAB] Navigate
[↑↓] Select
[Enter] Popup
1.1
Hitachi HDT725
232.88GB
2.0
HDS728080PLA38 76.69GB
2.1
ST3320620AS
298.09GB
Mirroring
Optimal
1.0
WDC WD1200JD-9 111.79GB
Phoenix - AwardBIOS CMOS Setup Utility
RAID Config
RAID Enable
[
]
Item Help
SATA Pri-Master RAID
[Enabled]
SATA Pri-Slave RAID
[Enabled]
Menu Level
►
SATA Sec-Master RAID
[Enabled]
SATA Sec-Slave RAID
[Enabled]
↑↓→←:Move
Enter:Select
+/-/PU/PD:Value
F10:Save
ESC:Exit
F1:General Help
F5: Previous Values
F7: Optimized Defaults
Enabled