Foxconn P31A-S Multi-language manual. - Page 34

Chapter 2 BIOS Description 5.4 PWRON After PWR-Fail This item is used to set which state the PC will take with when it resumes after an AC power loss. 5.5 Wake- up by PCI card This item is used to wake up the system by PCI card. 5.6 USB KB Wake-Up From S3 It can be active when the ACPI Suspend Type is set to be "S3(STR)". Use it to set wake up the system by USB KB when it is in S3(Suspend to RAM) mode. 5.7 Resume by Alarm This item is used to set the timing of the start-up function. In order to use this function, the start-up password function must be canceled. Also, the PC power source must not be turned off. 5.8 Date (of Month) Alarm W hen the Resume by Alarm set as "Enabled", this item will be modified. It is used to set the timing for the start-up date. 5.9 Time (hh:mm:ss) Alarm W hen the Resume by Alarm set as "Enabled", this item will be modified. It is used to set the timing for the start-up time. 5.10 HPET Support This item is used to enable or disable the HPET Support. 5.11 Power On by button/Mouse W hen enabled, it allows you to use the button/mouse to wake up the system from soft off and green mode. This feature requires an ATX power supply. 5.12 Power On by Keyboard This item allows you to use the PS/2 keyboard to wake up the system from soft off and green mode. This feature requires an ATX power supply. The setting values: Disabled; Password; Hot KEY; Any KEY; Keyboard 98. 5.13 KB Power ON Password This item allows you to set the KB power on password. 5.14 Hot Key Power ON This item allows you to set the power on hot key. The setting values: Ctrl-F1 ~ Ctrl-F12. 28