Frigidaire FAFS4272LW Installation Instructions (All Languages) - Page 7

Unpacking Washer - set

Page 7 highlights

Removing foam packaging WARNING SUFFOCATION HAZARD Destroy the carton and plastic bags after the washer is unpacked. Children might use them for play. Cartons covered with rugs, bedspreads, or plastic sheets can become airtight chambers causing suffocation. Place all materials in a garbage container or make materials inaccessible to children. 1 Temporarily remove door tape. 2 Open washer door and remove everything from the drum. 3 Close door and reapply door tape. 4 Using a rug, blanket or piece of cardboard to protect the floor, carefully lay the washer on it's back. CAUTION EXCESSIVE WEIGHT HAZARD To avoid back or other injury, have more than one person move or lift the washer. 5 Remove styrofoam base and shipping plug and set them aside. 6 Carefully return the washer to an upright position. 7 Carefully move the washer to within 4 feet (1 m) of its final location. IMPORTANT Save styrofoam base and shipping plug for use to help prevent washer damage during any future moves. UNPACKING WASHER 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

7
UNPACKING WASHER
WARNING
SUFFOCATION HAZARD
Destroy the carton and plastic bags after the washer is
unpacked. Children might use them for play. Cartons
covered with rugs, bedspreads, or plastic sheets can
become airtight chambers causing suffocation. Place
all materials in a garbage container or make materials
inaccessible to children.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more than one
person move or lift the washer.
IMPORTANT
Save styrofoam base and shipping plug for use to help
prevent washer damage during any future moves.
1
Temporarily remove door tape.
2
Open washer door and remove everything from the
drum.
3
Close door and reapply door tape.
4
Using a rug, blanket or piece of cardboard to
protect the
oor, carefully lay the washer on it’s
back.
Removing foam packaging
5
Remove styrofoam base and shipping plug and set
them aside.
6
Carefully return the washer to an upright position.
7
Carefully move the washer to within 4 feet (1 m) of
its
nal location.