Frigidaire FCFE3062AW Complete Owners Guide - Page 20

20 SETTING OVEN CONTROLS 1 Bake 4 Delay Start 5 2 Broil Cook Time 6 3 Steam Clean Keep Warm 7 START 13 OFF 14 12 On-Off 8 9 10 11 1. Bake is for delicate foods that need heat to rise and move gently in the oven. 2. Broil is for broiling and grilling foods under direct, high heat. 3. Steam Clean starts a steam cleaning cycle to loosen light soils. 4. Delay Start sets the oven to start after a specified period of time. 5. Warm Zone activates the surface warming element. 6. Cook Time sets the oven to turn off after running for a specified period of time. 7. Keep Warm Use to keep cooked foods at serving temperature in the oven. 8. Oven Light turns the interior light on and off at a touch and turns on automatically when oven door is open. 9. Set Clock takes you directly to the Setting the Clock function without going through the settings menu.. 10. Settings is used to set user preferences for various control functions including: • CLoC: set clock to 12 or 24 hour mode. • Hour: change between the 12-hour energy saving feature or continuous bake. • Aud: set the volume of control keys or to operate in silent mode. • F-C: display temperatures in Fahrenheit or Celcius. • rSEt: reset all user preferences to original factory settings. • uPo: .adjust the oven temperature settings. • E-SA: .turn the 12-hour energy savings feature on or off. 11. Timer On-Off is used to set or cancel the minute timer. 12. Up/Down Arrows used to scroll to temperature and time settings. 13. START starts cooking functions and sets the clock. 14. OFF turns off all cooking functions. Table 2: Oven Modes Feature Mode Min.Temp/ Time Bake 170°F (77°C) Max Temp/ Time 550°F (288°C) Broil LO HI Keep Warm 170°F (77°C) 3 Hours Clock 12 Hr. 1:00 Hr./Min. 12:59 Hr./Min. 24 Hr. 0:00 Min 23:59 Hr./Min. Timer OnOff 0:01 Min. 11:59 Hr./Min. Note: An entry acceptance tone (1beep) will sound each time a key is touched (the oven lock key is delayed 3 seconds). An entry error tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature.