Frigidaire FCFE3062AW Installation Instructions - Page 8
Care, Cleaning and, Maintenance, Before You Call for Service, Location, Carefully Slide Range Into,
View all Frigidaire FCFE3062AW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
30" ELECTRIC FRONT CONTROL FREESTANDING INSTALLATION INSTRUCTIONS 7. Carefully Slide Range Into Final Location Care, Cleaning and Maintenance Be sure to provide all the adequate clearances and dimensions before moving appliance into final location. Carefully slide range into final position while inserting rear leveling leg into the anti-tip bracket. Make sure the power cord folds into the remaining open floor area behind the range. Be sure to check the level of the range. Refer to the Use & Care Manual for cleaning instructions. If removing the range is necessary for cleaning or maintenance, disconnect the electrical power supply. If the electrical supply is inaccessible, lift the unit slightly at the front and pull out away from the wall. Pull only as far as necessary to disconnect the electrical supply. Finish removing the unit for servicing and cleaning. Model and Serial Number Location The serial plate is located on the front of the appliance, visible when the door is opened. Before You Call for Service Read the "Before You Call" and operating instruction sections in your Use & Care Manual. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Refer to the warranty in your Use & Care Manual for our toll-free service number and address. Please call or write if you have inquiries about your range product and/or need to order parts. Fig. 18 When ordering parts for or making inquires about your range, always be sure to include the model and serial numbers and a lot number or letter from the serial plate on your range. Your serial plate also tells you the Kilowatt rating (power requirements) and Voltage ratings. 8