Frigidaire FCFI3083AS Complete Owners Guide - Page 21

Bridge Function, Setting the Timer

Get Frigidaire FCFI3083AS PDF manuals and user guides View all Frigidaire FCFI3083AS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Bridge Function The Bridge function allows you to use an extra-long piece of cookware such as a griddle on the left side of your cooktop. If one of the left cook zones is active and cookware is detected in both of the left zones, the bridge function becomes available. 1. Turn the cooktop on by pressing the Power key. 2. Place a griddle or other long piece of cookware on the left cooking zones. The Power Level Indicators for the cooking zones will show "--". 3. Press the On-Off key for one of the cooking zones. The Power Level Indicator for the cooking zone will show "0". 4. Touch the Bridge control to activate the bridge function. The LED indicators next to the control will turn red, and the cook zone setting for both of the bridged zones will become linked Figure 13: Active bridge function 5. Set the cooking zone to the desired level (refer to Table 1) by pressing + or - on the front left cooking zone until the desired cooking level is shown. At any time, you can change the setting for the bridged cook zones by pressing the number of the new setting on the active control. To deactivate the bridge function, press the Bridge control or deactivate one of the bridged cooking zones by pressing its On-Off key. 21 SETTING SURFACE CONTROLS Setting the Timer The range has a timer function to remind you when food has been cooking for a specified amount of time. Figure 14: Cooktop Timer To set the timer: 1. Press the Timer On/Off key ( timer. The timer will show 00. ) to activate the 2. Press the Up and Down arrows to set the desired number of minutes. You can press and hold the Up or Down arrow to change the number of minutes faster. 3. Press the Timer On/Off key ( ) again to start the countdown. When the specified time has elapsed, "End" will show in the display, and a tone will sound. Press the ^, the v, or the Timer On/Off key ( ) to stop the signal. At any time, you can adjust the remaining time with the ^ and v keys. Each press adds or subtracts one minute. At any time, you can deactivate the timer by pressing the Timer On/Off key ( ). Important: When the timer stops or the tone sounds, the cooking zones will continue to operate. The timer does not affect the cooking zone settings in any way.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
21
SETTING SURFACE CONTROLS
Bridge Function
The Bridge function allows you to use an extra-long
piece of cookware such as a griddle on the left side of
your cooktop.
If one of the left cook zones is active and cookware is
detected in both of the left zones, the bridge function
becomes available.
1.
Turn the cooktop on by pressing the
Power
key.
2.
Place a griddle or other long piece of cookware
on the left cooking zones. The Power Level Indica-
tors for the cooking zones will show “--”.
3. Press the
On-Off
key for one of the cooking zones.
The Power Level Indicator for the cooking zone will
show “0”.
4. Touch the
Bridge
control to activate the bridge
function. The LED indicators next to the control will
turn red, and the cook zone setting for both of the
bridged zones will become linked
Figure 13: Active bridge function
5.
Set the cooking zone to the desired level (refer to
Table 1) by pressing
+
or
-
on the front left cooking
zone until the desired cooking level is shown.
At any time, you can change the setting for the
bridged cook zones by pressing the number of the
new setting on the active control.
To deactivate the bridge function, press the
Bridge
control or deactivate one of the bridged cooking
zones by pressing its
On-Off
key.
Setting the Timer
The range has a timer function to remind you when
food has been cooking for a specified amount of time.
Figure 14: Cooktop Timer
To set the timer:
1.
Press the Timer On/Off
key (
) to activate the
timer. The timer will show 00.
2. Press
the
Up
and
Down
arrows
to set the desired
number of minutes. You can press and hold
the
Up
or
Down
arrow
to change the number of minutes
faster.
3.
Press the Timer On/Off
key (
) again to start the
countdown.
When the specified time has elapsed, “End” will show
in the display, and a tone will sound. Press the ^, the v,
or the Timer On/Off
key (
) to stop the signal.
At any time, you can adjust the remaining time with the
^ and v keys. Each press adds or subtracts one minute.
At any time, you can deactivate the timer by pressing
the Timer On/Off
key (
).
Important:
When the timer stops or the tone sounds,
the cooking zones will continue to operate. The timer
does not affect the cooking zone settings in any way.