Home » Frigidaire Manuals » Ranges » Frigidaire FCRE3052AW » Manual Viewer

Frigidaire FCRE3052AW Complete Owners Guide - Page 6

Caution

Get Frigidaire FCRE3052AW PDF manuals and user guides

View all Frigidaire FCRE3052AW manuals

Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

IMPORTANT SAFETY INSTRUCTIONS CAUTION Do not touch surface burners or elements, areas near these burners or elements, interior surfaces of the oven, or the warmer drawer (if equipped). Surface burners and elements may be hot even though they appear cool. Areas near surface burners and elements may become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials touch these areas until they are cool. These areas may include the cooktop, surfaces facing the cooktop, oven vent areas, oven door, and oven window. Do not attempt to operate the appliance during a power failure. If the power fails, always turn off the appliance. If the appliance is not turned off and the power resumes, electric surface elements may resume operation when power is restored. Once the power resumes, reset the clock and the oven function. IMPORTANT INSTRUCTIONS FOR USING YOUR RADIANT COOKTOP Know which knob or key controls each surface heating area. Place cookware with food on the cooking area before turning it on. Turn the cooking area off before removing the cookware. Cookware handles should be turned inward and not extend over adjacent surface elements - To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the cookware should be positioned so that it is turned inward, and does not extend over other cooking areas. Use proper pan size - This appliance is equipped with one or more surface units of different sizes. Select cookware with flat bottoms that match the surface unit size. Using the proper cookware on the cooking area will improve efficiency. Glazed cooking utensils- Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cooktop service without breaking due to the sudden change in temperature. Check the manufacturer's recommendations for cooktop use. Improper cookware may break due to sudden changes in temperature. Check the cookware manufacturer's recommendations for cooktop use. Never leave surface elements unattended. Boilovers may cause smoking and greasy spills that may ignite. A pan that has boiled dry could be damaged and may damage the cooktop. Do not use a searing grill meant for use with a broiler pan on the cooktop. The searing grill is not designed for use on the cooktop. Doing so may result in a fire. When you are flaming foods under a ventilating hood, turn on the fan. IMPORTANT INSTRUCTIONS FOR GLASS AND CERAMIC COOKTOPS Do Not Clean or Operate a Broken Cooktop. If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician immediately. Clean cooktop glass with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid a steam burn. Some cleaners can produce harmful fumes if applied to a hot surface. Avoid scratching the cooktop glass with sharp objects. IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN Protective liners-Do not use aluminum foil, aftermarket oven liners, or any other materials or devices to line oven bottom, oven racks, or any other part of the appliance. Only use aluminum as recommended for baking, such as lining cookware or as a cover placed on food. Any other use of protective liners or aluminum foil may result in a risk of electric shock or fire or a short circuit. Save these instructions for future reference 6

Section	Page
Table of contents	1
Questions?	2
Product Registration	2
Record model & serial numbers here	2
Serial Plate Location	2
Need Help?	2
Visit the Frigidaire web site at www.frigidaire.com	2
Read this Use & Care Manual	2
If You Received a Damaged Range...	2
Save Time and Money	2
Product Record and Registration	2
IMPORTANT INSTRUCTIONS FOR USING YOUR OVEN	6
Bakeware	8
Cooking Conditions:	9
Cooking Results	9
Cooking Tips	9
Using Proper Cookware	10
Figure 1: Testing cookware	10
Figure 2: Proper cookware	10
Cookware Material Types	10
Element On and Hot Surface Indicator Lights	12
Figure 3: On indicator light	12
Figure 4: Hot surface indicator light	12
Types of ceramic cooktop elements	12
Figure 5: Single and double elements	12
Single radiant surface elements	13
1. Place correctly sized cookware on surface element.	13
2. Push in and turn the surface control knob in either direction (Figure 6) to the desired setting (refer to the “Suggested radiant surface element settings” in Table 1).	13
3. When cooking is complete, turn the radiant surface element OFF before removing the cookware.	13
Table 1: Suggested radiant surface element settings	13
Figure 6: Single element knob	13
1. Place correctly sized cookware on the surface element.	14
2. Push in and turn the surface control knob clockwise to begin heating both the inner and outer elements. If only the inner element is needed for smaller cookware, push in and turn the knob counter-clockwise (see Figure 7).	14
3. When cooking is complete, turn the knob to OFF before removing the cookware.	14
Figure 7: Dual element knob settings	14
Warm Zone	15
1. Push in the knob and turn in either direction (see Figure 8). The temperatures are designated by hi and lo. However, the control can be set at any position between hi and lo for different levels of warming.	15
2. When ready to serve, turn the control to OFF. The hot surface indicator light will remain on until the warm zone cools. .	15
Table 2: Recommended warm zone settings	15
Home Canning	16
Oven Vent Location	17
Figure 9: Oven vent	17
Types of oven racks	17
Figure 10: Oven rack types	17
Removing, replacing, and arranging flat or offset oven racks	17
Before Setting Oven Controls	17
1. Bake - Use to select for all baking.	18
2. Broil - Use to select the broil feature. When broil is active the indicator light above the broil key will glow.	18
3. Timer On-Off - Use to set or cancel the minute timer. The minute timer does not start or stop cooking.	18
4. Set Clock - Use with up or down arrows to set the time of day.	18
5. OFF - Use to stop or to clear any feature previously entered except time of day and minute timer. Press OFF to stop cooking.	18
6. Up and Down arrow keys - Use with the feature or function keys to set oven temperature or to adjust the clock or minute timer.	18
LO	18
HI	18
1:00 Hr./Min.	18
12:59 Hr./Min.	18
Setting the Clock	18
1. Press Set Clock once (do not hold Set Clock key down).	18
2. Within 5 seconds, press and hold or until the correct time of day appears in the display.z	18
Temperature display (Fahrenheit/Celsius)	19
1. Press Broil until F or C appears in the display.	19
2. Press or to change °F to °C or °C to °F. To accept the change, wait 6 seconds until the oven control provides an acceptance beep.	19
3. The display will return to the time of day.	19
Operating oven light	19
Setting the minute timer	19
1. Press Timer on-off.	19
2. Press to increase time in one-minute increments. Press and hold to increase time in 10-minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.	19
3. When the diesired timer setting is reached, release the arrow key. The timer will start counting down within a few seconds.	19
4. When the set time expires, the timer will sound a 3 second tone. The display will show 00:00 until the timer is cancelled by pressing Timer On/Off.	19
1. Press Timer on-off once.	19
Setting Bake	20
1. Press Bake. — — — appears in the display.	20
2. Within 5 seconds, press or. The display will show 350°F (177°C). The temperature can then be adjusted in 5°F (1°C) increments.	20
3. When a key is released, the bake indicator light turns on and the oven will heat to the selected temperature. When the oven reaches the set temperature, the control will beep once indicating the oven is finished preheating. During bake, the indica...	20
4. To cancel the baking function, press OFF.	20
1. Press Bake.	20
2. Press or to increase or decrease to a new temperature. The bake indicator light on the electronic display will turn on and off when using the bake feature. This is normal and indicates that the oven is cycling to maintain the selected baking tempe...	20
3. To cancel baking press OFF.	20
Figure 11: Rack positions	20
Figure 12: Baking layer cakes with one or two oven racks	20
Setting Broil	21
1. Arrange the oven rack while oven is still cool.	21
2. Press Broil. — — will appear in display.	21
3. Press for HI broil or for LO broil. Most foods may be broiled at the HI broil setting.	21
4. For optimum results, preheat Broil for 5 minutes before adding food..	21
5. Place the insert on the broil pan (if equipped), then place the food on the broil pan insert (if using a broiler pan and insert).	21
6. Place the broiler pan and insert on the oven rack.	21
7. Broil on one side until food is browned. Turn and broil food on 2nd side.	21
8. When broiling is finished press OFF	21
Figure 13: Broil pan and insert (L) Broil stop position (R)	21
Figure 14: Open door broil position	21
Table 3: Broil recommendations	22
5	22
5	22
HI	22
6:00	22
7:00	22
4:00	22
5:00	22
Rare	22
Medium	22
4	22
HI	22
8:00	22
6:00	22
Well	22
3	22
HI	22
20:00	22
10:00	22
Well	22
4	22
HI	22
8:00	22
6:00	22
Well	22
3	22
HI	22
13:00	22
--	22
Well	22
4	22
HI	22
5:00	22
--	22
Well	22
5	22
HI	22
8:00	22
7:00	22
Well	22
Adjusting the oven temperature	22
1. Press and hold the Bake key and release when the display shows the factory temperature setting of 00. If the oven temperature has been previously adjusted from the factory setting, the last adjusted value will appear in the display instead.	22
2. The temperature can now be adjusted up +35°F (+19°C), in 5°F increments with each press of the key.	22
3. When lowering the oven temperature using the key, minus sign (-) will appear before the number to indicate that the oven will be cooler by the displayed amount of degrees.	22
4. To accept the change, wait for the oven control to provide an acceptance beep.	22
Figure 14: Use cleaners with caution	23
Cooktop Maintenance	25
Figure 15: Cooktop care	25
Cooktop Cleaning	25
Figure 16: Cooktop cleaning	25
Cleaning under bake element (some models)	26
Figure 17: Lift bake element	26
Removing and Replacing the Oven Door	27
1. Open oven door completely, horizontal with floor (See Figure 18).	27
2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 19). A tool such as a small flat-blade screwdriver may be required.	27
3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 20).	27
4. Close the door to approximately 10 degrees from the door frame (See Figure 20).	27
5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 21).	27
1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 20).	27
2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 20 and Figure 21). The hook of the hinge arms must be fully seated onto th...	27
3. Fully open the oven door, horizontal with floor (See Figure 18).	27
4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 19).	27
5. Close the oven door.	27
Figure 18: Door hinge location	27
Figure 19: Door hinge locks	27
Figure 20: Holding door for removal	27
Figure 21: Replacement and location of hinge arm and roller pin	27
Replacing the Oven Light	28
1. Turn electrical power off at the main source or unplug the appliance.	28
2. Replace the bulb with a new appliance bulb.	28
3. Turn the power back on again at the main source (or plug the appliance back in).	28
4. Be sure to reset the time of day on the clock.	28
Figure 22: Oven light	28
Remove and replace storage drawer (some models)	28
Oven Baking	29
Solutions to Common Problems:	30
Cooktop Problems	31

Match case Limit results 1 per page

IMPORTANT SAFETY INSTRUCTIONS

Save these instructions for future reference

IMPORTANT INSTRUCTIONS FOR USING

YOUR RADIANT COOKTOP

Know which knob or key controls each surface

heating area. Place cookware with food on the

cooking area before turning it on. Turn the

cooking area off before removing the cookware.

Cookware handles should be turned inward and

not extend over adjacent surface elements — To

reduce the risk of burns, ignition of flammable

materials, and spillage due to unintentional

contact with the utensil, the handle of the

cookware should be positioned so that it is turned

inward, and does not extend over other cooking

areas.

Use proper pan size - This appliance is equipped

with one or more surface units of different sizes.

Select cookware with flat bottoms that match the

surface unit size. Using the proper cookware on

the cooking area will improve efficiency.

Glazed cooking utensils— Only certain types of

glass, glass/ceramic, ceramic, earthenware, or

other glazed utensils are suitable for cooktop

service without breaking due to the sudden

change in temperature. Check the manufacturer’s

recommendations for cooktop use.

Improper cookware may break due to sudden

changes in temperature. Check the cookware

manufacturer’s recommendations for cooktop

use.

Never leave surface elements unattended. Boil-

overs may cause smoking and greasy spills that

may ignite. A pan that has boiled dry could be

damaged and may damage the cooktop.

Do not use a searing grill meant for use with a

broiler pan on the cooktop. The searing grill is not

designed for use on the cooktop. Doing so may

result in a fire.

When you are flaming foods under a ventilating

hood, turn on the fan.

IMPORTANT INSTRUCTIONS FOR GLASS

AND CERAMIC COOKTOPS

Do Not Clean or Operate a Broken Cooktop. If

cooktop should break, cleaning solutions and

spillovers may penetrate the broken cooktop and

create a risk of electric shock. Contact a qualified

technician immediately.

Clean cooktop glass with caution. If a wet sponge

or cloth is used to wipe spills on a hot cooking

area, be careful to avoid a steam burn. Some

cleaners can produce harmful fumes if applied to

a hot surface.

Avoid scratching the cooktop glass with sharp

objects.

IMPORTANT INSTRUCTIONS FOR USING

YOUR OVEN

Protective liners—Do not use aluminum foil, after-

market oven liners, or any other materials or

devices to line oven bottom, oven racks, or any

other part of the appliance. Only use aluminum as

recommended for baking, such as lining

cookware or as a cover placed on food. Any other

use of protective liners or aluminum foil may

result in a risk of electric shock or fire or a short

circuit.

Do not touch surface burners or elements,

areas near these burners or elements, interior

surfaces of the oven, or the warmer drawer (if

equipped). Surface burners and elements may

be hot even though they appear cool. Areas

near surface burners and elements may

become hot enough to cause burns. During and

after use, do not touch, or let clothing or other

flammable materials touch these areas until

they are cool. These areas may include the

cooktop, surfaces facing the cooktop, oven vent

areas, oven door, and oven window.

Do not attempt to operate the appliance during

a power failure. If the power fails, always turn off

the appliance. If the appliance is not turned off

and the power resumes, electric surface

elements may resume operation when power is

restored. Once the power resumes, reset the

clock and the oven function.

CAUTION