Frigidaire FEQ1442ES Operating Instructions
Frigidaire FEQ1442ES - 27" Electric Dryer Manual
 |
UPC - 012505373824
View all Frigidaire FEQ1442ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire FEQ1442ES manual content summary:
- Frigidaire FEQ1442ES | Operating Instructions - Page 1
of fire, electric shock or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS in your dryer Owner's Guide before operating this will not light. 6. The changes you make will be remembered the next time that cycle is selected. See the "Dryer Settings Chart" for more details. 7. Press START to - Frigidaire FEQ1442ES | Operating Instructions - Page 2
Timed Dry To manually select the heat for 30 minutes to help reduce wrinkling. When the Cycle Signal is selected, a beep will be heard periodically. The load may be removed any time during Press Saver. Dryer Features Control (Control Lock) To avoid having someone accidentally start or stop the dryer - Frigidaire FEQ1442ES | Operating Instructions - Page 3
Checklist" in the Owner's Guide for the possible cause and solution. Make correction, then select a cycle and press START. If the dryer stops, status lights flash again and the beeping continues, please contact service for assistance. Error Code 4 beeps 6 beeps Error Dryer ran too long Push button - Frigidaire FEQ1442ES | Operating Instructions - Page 4
Instrucciones de Funcionamiento Del Secador Antes de Usar Su Secadora Lea la Guía del Usuario de su secadora. Contiene información importante sobre seguridad y garantía. Además, contiene muchas sugerencias para obtener los mejores resultados de secado. ADVERTENCIA Para reducir el riesgo de incendio - Frigidaire FEQ1442ES | Operating Instructions - Page 5
ciclo: • Secado (Drying) • Enfriado (Cool Down) • Salvador de Plancho (Press Saver) • Filtro de Pelusas Limpio (Clean Lint Filter) • (Bloqueo de Control) Sin Calor (No Heat) sólo se debe usar con Tiempo de Secado para secar prendas que contienen plumas, edredones, goma espuma, plástico o materiales - Frigidaire FEQ1442ES | Operating Instructions - Page 6
flash otra vez y el señalar continúa, satisface el servicio del contacto para la ayuda. Codigo de Error 4 Señales Sonoras Error largo o acuñado en el panel de control. lance. Desuna el botón. La duraci ) Media (Medium) Baja (Low) Sin Calor (No Heat) Nivel de la Sequedad Más Seco (More Dry) Normal
-
1 -
2 -
3 -
4 -
5 -
6
 |
 |
Before Operating Your Dryer
Read your dryer Owner’s Guide.
It has impor-
tant safety and warranty information. It also has
many suggestions for best drying results.
To reduce the risk of fire, electric
shock or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer
Owner’s
Guide before operating this appliance.
Operating Steps
Read “Drying Procedures” in your
Owner’s
Guide.
It explains these operating steps in detail.
1.
Prepare items for drying.
2.
Check that lint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet. Close the door.
4.
Select the cycle and drying temperature for each
load.
To change the temperature, turn the TEMP
knob to the desired temperature.
5.
A suitable dryness level and options will auto-
matically be displayed for each cycle.
To
change the dryness level, press DRYNESS until
the desired selection is made.
To select an
option, press OPTIONS until the indicator for a
desired option flashes and press SELECT.
7.
Press START to begin cycle.
•
To pause the cycle or change settings,
press PAUSE/CANCEL once.To resume
the cycle, press START again.
•
To stop or change the cycle, press
PAUSE/CANCEL twice.
8.
A signal will sound at the end of the cycle and
periodically during
Press Saver when the Cycle
Signal option is selected.
When the cycle ends,
remove items immediately and hang or fold.
9.
Clean the lint screen after every load.
PN 134420600C (0412)
DRYER OPERATING INSTRUCTIONS
Towels
Select this Auto Dry cycle for towel loads.
Normal
Select this Auto Dry cycle for cotton items.
Perm Press
Select this Auto Dry cycle to dry cottons and blends
with a no-iron finish.
Cycle Selection
For best results, follow the fabric care label instruc-
tions on items to be dried.
Auto Dry
Auto Dry cycles take the guesswork out of drying
time. The load will automatically be dried at the
selected temperature to the desired dryness level.
The dryer senses the moisture level of the load as
it tumbles through heated air.
Auto Dry cycles save
time and energy and protect fabrics.
When the load has reached the selected dryness
level, it will continue to tumble, unheated, during a
Cool Down period. This helps reduce wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and damp-
ness of load, weight and fabric type. Room tem-
perature and humidity, type of installation and elec-
trical voltage or gas pressure can also affect drying
time.
Follow the same steps to delete an option.
If a
dryness level or option is not available for a
cycle,it will not light.
6.
The changes you make will be remembered the
next time that cycle is selected.
See the “Dryer
Settings Chart” for more details.