Frigidaire FFBD1831US Complete Owners Guide - Page 5

OPERATING INSTRUCTIONS Wash Cycles Wash Options Functions Cycle Indicator Wash Cycle Selections Cycle times are approximate and will vary with the options selected. Hot water is necessary to activate the detergent and melt fatty food soils. An automatic sensor will check the incoming water temperature. If it is not at the appropriate temperature the timer will delay the cycle to allow automatic water heating during the main wash. When the High Temp wash is selected an even higher temperature will be assured to handle heavier soil loads. Wash Cycles Heavy Wash Recommended for pots, pans, casseroles and dinnerware having light to heavily soiled loads. temperature is not correct. Certified residential dishwashers are not intended for licensed food establishments. WARNING The Sanitize option is only available with Heavy Wash and Normal Wash cycles. High Temp When High Temp is selected, the temperature of the water will be maintained at 140°F (60°C) max. Heat Dry When Heat Dry is selected, the heater will work during the drying process. Normal Wash Recommended for lightly to heavily soiled loads. Functions 1 Hour Wash A shorter wash recommended for lightly soiled loads that do not need drying. China Crystal Recommended for lightly soiled China and Crystal. Energy Saver Recommended for lightly soiled and pre-rinsed dishes and silverware. Rinse Only Recommended for pre-rinsing dishes or glasses. This is only a rinse that keeps food from drying on your dishes and reduces odor buildup in your dishwasher until you are ready to wash a full load. Do not use detergent. Wash Options Press the Options button to scroll through the options. The indicator light will illuminate when the option has been selected. Sanitize When Sanitize is selected, the temperature of water will be maintained at 156.2°F (69°C) max. The max temperature may not be reached if the incoming water START/Cancel Press START/Cancel to start a wash cycle. Press START/Cancel and hold for 3 seconds to cancel a cycle that is already in progress. Delay The Delay option allows you to automatically delay starting your dishwasher from 1-24 hours. To start 1-24 hour delay, press the Delay button until the desired delay time shows in the display window (1h-24h) and press the START/Cancel button. A light will come on indicating the delay start has been activated and will remain on until the cycle starts. To cancel the Delay option and begin the cycle before the delay period is over, press the Start/Cancel button and hold for 3 seconds. Control Lock Use to lock all controls and prevent children from accidently changing the dishwasher cycle or starting the dishwasher. Press and hold both Option and Delay, at the same time, for 3 seconds to lock. After the function is selected the control lock icon will illuminate. Press and hold both Option and Delay again for 3 seconds to unlock. 5