Frigidaire FFHT1725PS Complete Owner's Guide (English) - Page 4

Installation - model

Page 4 highlights

Installation This Use & Care Guide provides general operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Guide. Before starting the refrigerator, follow these important first steps. Location • Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug. • If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources. • The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator. • Consider water supply availability for models equipped with an automatic ice maker. If you do not hook up water to the refrigerator, remember to turn the ice maker off. Leveling All four corners of your refrigerator must rest firmly on a solid floor. Your refrigerator is equipped with adjustable front rollers or front leveling screws to help level your unit. To level your refrigerator: 1 Remove toe grille. 2 Use flat-blade screwdriver or 3/8" socket wrench to adjust front rollers. Use adjustable wrench to adjust leveling screws. CAUTION Do Not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator. Do Not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator. Installation Installation clearances • Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections: Sides & Top Back 3/8 inch 1 inch  NOTE If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.  NOTE Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope 1/4" to 1/2" from front to back. Then level the refrigerator from side-to-side. Adjustable Front Roller (some models) Raise Stationary Front Roller with Leveling Screw (some models) 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13

4
NOTE
If your refrigerator is placed with the door hinge side
against a wall, you may have to allow additional space
so the door can be opened wider.
NOTE
Raise the front of the refrigerator enough so the doors
close freely when opened halfway.
The refrigerator
should slope 1/4” to 1/2” from front to back.
Then
level the refrigerator from side-to-side.
INSTALLATION
CAUTION
Do Not install the refrigerator where the temperature
will drop below 55°F (13°C) or rise above 110°F
(43°C).
The compressor will not be able to maintain
proper temperatures inside the refrigerator.
Do Not block the toe grille on the lower front of your
refrigerator. Sufficient air circulation is essential for the
proper operation of your refrigerator.
This Use & Care Guide provides general operating
instructions for your model. Use the refrigerator only as
instructed in this Use & Care Guide.
Before starting the
refrigerator, follow these important first steps.
Location
Choose a place that is near a grounded electrical
outlet.
Do Not
use an extension cord or an
adapter plug.
If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher or
other heat sources.
The refrigerator must be installed on a floor that is
level and strong enough to support a fully loaded
refrigerator.
Consider water supply availability for models
equipped with an automatic ice maker. If you do
not hook up water to the refrigerator, remember to
turn the ice maker off.
Installation
Installation clearances
Allow the following clearances for ease of
installation, proper air circulation, and plumbing
and electrical connections:
Sides & Top
3
/
8
inch
Back
1 inch
Leveling
All four corners of your refrigerator must rest firmly on a
solid floor. Your refrigerator is equipped with adjustable
front rollers or front leveling screws to help level your
unit.
To level Your refrigerator:
1
Remove toe grille.
2
Use flat-blade screwdriver or 3/8” socket wrench
to adjust front rollers.
Use adjustable wrench to
adjust leveling screws.
Raise
Adjustable Front Roller
(some models)
StationarY Front Roller
with Leveling Screw
(some models)