Frigidaire FFHT2033VS Complete Owner s Guide - Page 22

CARE & CLEANING Care & Cleaning Tips Part What To Use Tips and Precautions Interior & Door Liners • Soap and water • Baking soda and water Use 2 tablespoons of baking soda in 1 quart of warm water. Be sure to wring excess water out of sponge or cloth before cleaning around controls, light bulb or any electrical part. Door Gaskets • Soap and water Wipe gaskets with a clean soft cloth. Drawers & • Soap and water Bins Use a soft cloth to clean drawer runners and tracks. Glass Shelves • Soap and water • Glass cleaner • Mild liquid sprays Allow glass to warm to room temperature before immersing in warm water. Toe Grille • Soap and water • Mild liquid sprays • Vacuum attachment Vacuum dust from front of toe grille. Remove toe grille (see Installation Instructions). Vacuum backside, wipe with sudsy cloth or sponge. Rinse and dry. Exterior & Handles • Soap and water • Non Abrasive Glass Cleaner Do not use commercial household cleaners containing ammonia, bleach or alcohol to clean handles. Use a soft cloth to clean smooth handles. DO NOT use a dry cloth to clean smooth doors. Exterior & Handles (Stainless Steel Models Only) • Soap and water • Stainless Steel Cleaners Never use CHLORIDE or cleaners with bleach to clean stainless steel. Clean stainless steel front and handles with nonabrasive soapy water and a dishcloth. Rinse with clean water and a soft cloth. Use a non-abrasive stainless steel cleaner. These cleaners can be purchased at most home improvement or major department stores. Always follow manufacturer's instructions. Do not use household cleaners containing ammonia or bleach. NOTE: Always clean, wipe and dry with the grain to prevent scratching. Wash the rest of the cabinet with warm water and mild liquid detergent. Rinse well, and wipe dry with a clean soft cloth. Replacing Light Bulbs • Unplug refrigerator • Wear gloves • Remove light cover (some models) • Replace old bulb • Replace light cover (some models) • Plug in the refrigerator CAUTION: Wear gloves when replacing light bulbs to avoid getting cut. Use same wattage when replacing bulb LED Bulbs • Call customer service WARNING: Do not attempt to replace LED lights due to replace to high voltage exposure. 22