Frigidaire FFLG2022MW Complete Owner's Guide - Page 7

WASHER OPERATING INSTRUCTIONS Washing Procedures, continued 6 Add laundry load to washer. • For best washing performance, dry load level should not be higher than the upper row of holes in the wash tub. Do not overload the washer. For models without a built-in fabric softener dispenser: • Follow fabric softener label directions. • Add diluted fabric softener to the final rinse. You may use a fabric softener dispensing ball. Í NOTE To prevent staining, do not overfill the "FABRIC SOFTENER" chamber or pour liquid fabric softener directly on the wash load. Other Wash Products • Water conditioner, detergent booster and enzyme products may be added with the detergent. • Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. • When washing a single heavy item, add 1 or 2 towels to balance the load. 7 If desired, add liquid fabric softener to fabric softener dispenser (available on some models). For models with built-in dispenser: • Add liquid softener to the dispenser, following fabric softener label directions. DO NOT use granular detergent in this dispenser. • DO NOT fill above the maximum fill line. • Turn fabric softener option on. • Do not use bleach in this dispenser. IMPORTANT Use of multi-product (detergent plus softener) sheets or color-absorbing sheets NOT recommended. They could disable your machine and result in unwarranted repair costs. 8 Select the appropriate cycle and settings for the load. • See Washer Operating Instructions on following pages. 9 Start the washer. • Close the washer lid. The washer will not operate with the lid open. • Push in or turn the cycle selector knob or turn any option knob to "wake" the washer. You will hear three beeps to indicate washer is ready to operate. • After making your selections, push in the selector knob to start the cycle. You will hear one beep and the washer lid will lock. • Unless a manual water level is selected (if available), the washer will perform a dry load sensing procedure before adding water to the tub. • To add a forgotten item to the wash tub, push in the cycle selector knob to pause the cycle. You will hear two beeps. After the lock releases, lift the lid and add the item. Close the lid and push in the selector knob again, continuing the current cycle. • To stop a running cycle, push in the cycle selector knob. 7