Frigidaire FFPS4533UM Complete Owners Guide - Page 6

Door Removal/reversal Instructions

Page 6 highlights

DOOR REMOVAL/REVERSAL INSTRUCTIONS  NOTE The direction in which your refrigerator doors open (door swing) can be reversed, from left to right or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be performed by a qualified person. IMPORTANT Before you begin, turn the refrigerator temperature control to "OFF" and remove the electrical power cord from the wall outlet. Remove any food from door shelves. Door removal and reversal instructions for Model 1 FFPA3322UM: • Ensure the unit is unplugged and empty. • All parts removed must be saved for reinstallation of the door. • Do not lay the unit flat as this may damage the coolant system. • It is better that 2 people handle the unit during assembly. 2 1. Remove the hinge cover and the upper hinge. Remove the hinge hole cover from the top left side of the cabinet. Remove the door from the cabinet. 2. Remove the hinge hole cover from the top left side of the door and install it in the hinge hole on the top right side of the door. 3. Remove both feet. Remove the lower hinge from the cabinet. The lower hinge must be turned over before being reinstalled. 3 4. Install the lower hinge on the left side of the cabinet. Install the door on the cabinet. 5. Before tightening the screws on the upper hinge, ensure that the top of the door is level with the cabinet and that the rubber gasket is making a good seal. Install both feet. Install the screw hole cover on the top right side of the cabinet. 4 5 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

6
NOTE
The direction in which your refrigerator doors open (door swing) can be reversed, from left
to right or right to left, by moving the door hinges from one side to the other. Reversing the
door swing should be performed by a qualified person.
DOOR REMOVAL/REVERSAL INSTRUCTIONS
IMPORTANT
Before you begin, turn the refrigerator temperature control to “OFF” and remove the electrical
power cord from the wall outlet. Remove any food from door shelves.
Door removal and reversal
instructions for Model
FFPA3322UM:
Ensure the unit is unplugged and empty.
All parts removed must be saved for
reinstallation of the door.
Do not lay the unit flat as this may
damage the coolant system.
It is better that 2 people handle the unit
during assembly.
1. Remove the hinge cover and the upper
hinge. Remove the hinge hole cover from
the top left side of the cabinet. Remove
the door from the cabinet.
2. Remove the hinge hole cover from the
top left side of the door and install it in
the hinge hole on the top right side of the
door.
3. Remove both feet. Remove the lower
hinge from the cabinet. The lower
hinge must be turned over before being
reinstalled.
4. Install the lower hinge on the left side
of the cabinet. Install the door on the
cabinet.
5. Before tightening the screws on the upper
hinge, ensure that the top of the door is
level with the cabinet and that the rubber
gasket is making a good seal. Install both
feet. Install the screw hole cover on the
top right side of the cabinet.
1
2
3
5
4