Frigidaire FFQE5100PW Use and Care Guide - Page 10
Cycle Options, Cycle Settings, For best results
View all Frigidaire FFQE5100PW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
OPERATING INSTRUCTIONS Cycle Settings For best results Follow the fabric care label instructions on items to be dried. Appropriate drying Temperature, Dryness Level and Options will automatically be displayed for each cycle. The settings can be changed before the cycle is started. Modifications for each cycle will be remembered and recalled each time that cycle is selected in the future. If changes are attempted after the cycle starts, the lights will blink, the signal will beep and "Err" will be displayed. Dryness Level (Auto Dry) To change the preset level, press the dry level button to scroll to the degree of dryness desired. To protect your fabrics, not all dryness levels are available with every cycle. If a dry level is not appropriate for the cycle, it cannot be selected. The dry level selected for the cycle will be remembered and recalled each time that cycle is selected in the future. Select the normal dry level for most Auto Dry cycles. Occasionally a load may seem too damp or over-dried at the end of the cycle. To increase drying time for similar loads in the future, select high. For loads requiring less drying time, select low. Select damp for items you wish to partially dry before hanging or ironing. To return to factory settings, press these two buttons at the same time and hold until the signal sounds. NOTE To change settings after the cycle starts, press pause, adjust the setting and press START to resume the cycle. Drying Temperature To change the preset temperature, press the temp button to scroll to the desired setting. To protect your fabrics, not all temperatures are available with every cycle. The temperature selected for the cycle will be remembered and recalled each time that cycle is selected in the future. max Recommended for durable fabrics and towels. high Recommended for most cotton fabrics. normal Recommended for wrinkle free, easy care, lightweight fabrics and bulky loads. low Recommended for delicate fabrics. air dry This setting (no heat) should only be used with a Timed Dry cycle to dry items containing feathers, down, foam rubber, plastics or rubber-like materials; to refresh clothing, stuffed animal, pillows or blankets; and to dust draperies. Cycle Options To select an option, press options until the indicator for the desired option flashes, then press select. If an option is not available for a cycle, the indicator will not light. Follow the same steps to delete an option. The options selected for the cycle will be remembered and recalled each time that cycle is selected in the future. NOTE To change options after the cycle starts, press pause, adjust the setting and press START to resume the cycle. wrinkle release Select wrinkle release if the dried load might not be removed promptly at the end of the cycle. The dry load will continue tumbling without heat to help reduce wrinkling. When Chime is selected, a beep will be heard periodically. The load may be removed any time during wrinkle release. chime A signal will sound at the end of the cycle (and periodically during wrinkle release) if this option is selected. The signal has an adjustable volume level or can be turned off. 10