Frigidaire FFRE063ZA1 Installation Instructions
Frigidaire FFRE063ZA1 Manual
 |
View all Frigidaire FFRE063ZA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Frigidaire FFRE063ZA1 manual content summary:
- Frigidaire FFRE063ZA1 | Installation Instructions - Page 1
Installation Instructions READ BEFORE INSTALLING UNIT BK Window Mounting (5,000 - 6,000 BTU) INSTALLATION WARNINGS AND CAUTION Carefully read the installation manual before beginning. be exposed: Carefully inspect location where air conditioner will be installed. Be sure it will support the weight - Frigidaire FFRE063ZA1 | Installation Instructions - Page 2
914mm) 13.25" min (337 mm) Vinyl-Clad Windows Storm Window: If the air conditioner is blocked by Storm Window, add wood as shown in FIG. 5, or remove storm window before air conditioner is installed. If Storm Window Frame must remain, be sure the drain holes or slots are not caulked or painted shut - Frigidaire FFRE063ZA1 | Installation Instructions - Page 3
Installation Keep a firm grip on the air conditioner, carefully place the unit into the window opening so the bottom of the air conditioner frame is against the window sill (FIG. 6A & FIG. 6B). Carefully close the window behind the top rail of the unit. FIG. 6A FIG. 6B INSIDE OUTSIDE INSIDE - Frigidaire FFRE063ZA1 | Installation Instructions - Page 4
and stick the panel on the side curtain, as shown (FIG.12). Repeat these instructions for the other side. L L 1 2 3 4 1 2 3 4 5 is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by window itself. 9 Cut foam window seal and insert it into - Frigidaire FFRE063ZA1 | Installation Instructions - Page 5
with a proper length, peel off the protective backing and plug any gaps if needed as shown FIG.16. Removing the air conditioner From Window Turn the air conditioner off, and disconnect power cord. Remove sash seal from between windows, and unscrew sash lock. Remove screws installed through frame
-
1 -
2 -
3 -
4 -
5
 |
 |
READ BEFORE INSTALLING UNIT
BK Window Mounting (5,000 - 6,000 BTU)
1
Installation Instructions
Before installing, the top rail must be assembled on the unit.
Top Rail Hardware
Qty.
4
1
Top Rail
Drill (If pilot holes are needed)
7
1
Mounting Hardware
Qty.
2
(For Vinyl-Clad windows)
NOTE:
the best way to store unit during winter, or when not
in use.
2
(For Wooden windows)
Top Rail
Fig. C
weather seals
5
window sash seal foam
1
be exposed:
Carefully read the installation manual before beginning.
INSTALLATION WARNINGS AND CAUTION
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended
period of time.
66129926906
insulation panel
ruler
2
1
Fig. B