Frigidaire FFRE063ZA1 Installation Instructions - Page 4
FIG. 10, FIG. 11, FIG. 12
 |
View all Frigidaire FFRE063ZA1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Installation Measure the width of the inner side curtain with the provided ruler, as shown (FIG. 10). Mark a line on the provided insulation panel according to the measured width, then cut out the insulation panel along the line, as shown (FIG.11). Peel off the protecting film behind the insulation panel and stick the panel on the side curtain, as shown (FIG.12). Repeat these instructions for the other side. L L 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 FIG. 10 L FIG. 11 FIG. 12 (FIG. 13). NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by window itself. 9 Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 14). FIG. 13 FIG. 14 FOAM SEAL 4
-
1 -
2 -
3 -
4 -
5
 |
 |
FIG. 14
FOAM SEAL
FIG. 13
Installation
Cut foam window seal and insert it into the space between the upper and lower sashes (FIG. 14).
FIG. 10
FIG. 11
FIG. 12
NOTE
: It is difficult to lock the windows with the sash lock for Vinyl-Clad windows, so you can use lock by
(FIG. 13).
window itself.
9
Measure the width of the inner side curtain with the provided ruler, as shown (FIG. 10). Mark a line on the
provided insulation panel according to the measured width, then cut out the insulation panel along the line,
as shown (FIG.11). Peel off the protecting film behind the insulation panel and stick the panel on the side
curtain, as shown (FIG.12). Repeat these instructions for the other side.
L
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
L
L
4