Frigidaire FFSS2615TD Complete Owner s Guide - Page 14

CONTROLS Allowing Cooling Time Before Use To ensure safe food storage, allow your refrigerator to operate with the doors closed for at least 8 to 12 hours before placing food inside. During this cooling period, you do not need to adjust the controls, which are preset at the factory. Setting Cooling Temperatures  NOTE When changing control settings, wait 24 hours for the temperature to stabilize before making additional changes. Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at the top of the fresh food compartment. The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and fresh food compartments. Should you desire to see what the current accurate temperature is, place a separate thermometer inside the freezer or fresh food compartment in the desired location. TEMPERATURE ADJUSTMENT To adjust the temperature to a higher or lower setting, press the Up (Cold) or Down (Colder) button closest to the display. The first time you press the button, the display shows current setting you entered. Each press of the button after that changes the setting by one. The display shows your new setting momentarily, then changes back to the current temperature. (Single Digit Display - Features may vary.) Temperature Adjustment If Fresh Food compartment Adjust Fresh Food control one degree colder by pressing Down is too warm (Colder) button. If Fresh Food compartment Adjust Fresh Food control one degree warmer by pressing the Up is too cold (Cold) button. If Freezer compartment is Adjust Freezer control one degree colder by pressing Down too warm (Colder) button. If Freezer compartment is Adjust Freezer control one degree warmer by pressing the Up too cold (Cold) button. 14