Frigidaire FFSS2615TD Product Specifications Sheet - Page 3

FFSS2615T D/S/P/E SIDE-BY-SIDE REFRIGERATOR 25.5 CU. FT. STANDARD-DEPTH A C B "Built-In Look"Cutout Dimensions (A) 70 1/4" (B) 36" (C) 287/8" Top View Recessed water line Recessed electrical outlet 24" Cabinet Allow 1" min. clearance at rear for proper air circulation and water / electrical connections 287/8" Side Panels, 1/2" min. width 25" Countertop 313/4" 36" Doors 35 5/8" Cabinet 69 5/8" with 5" 3/8" rollers 68 7/8" with 3/8" rollers Water line inlet location (left bottom rear) 28 3/4" 34 1/2" Allow 49 1/2" min. (with doors 90° open) Power cord location (right bottom rear) INSTALLATION SPECIFICATIONS • Product Shipping Weight (approx.) - 300 Lbs. • Voltage Rating - 120V / 60 Hz • Connected Load (kW Rating) @ 120 Volts = 1.02 kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @ 120 Volts = 8.5 Amps • Always consult local and national electric & plumbing codes. • Floor should be level surface of hard material, capable of supporting fully loaded refrigerator. • When installing refrigerator adjacent to wall, cabinet or other appliance that extends beyond front edge of unit, 20" minimum clearance recommended to allow for optimum 120° to 180° door swing, providing complete drawer / crisper access and removal. (Absolute 4-1/2" minimum clearance will ONLY allow for 90° door swing which will provide drawer / crisper access with restricted removal.) • To ensure optimum performance, avoid installing in direct sunlight or close proximity to range, dishwasher or other heat source. • For proper ventilation, front grille MUST remain unobstructed. • Recess electrical outlet when possible. • Water recess on rear wall recommended to prevent water line damage. • Water Pressure - Cold water line must provide between 30 and 100 pounds per square inch (psi). • Copper tubing with 1/4" O.D. recommended for water supply line with length equal to distance from rear of unit to household water supply line plus 7 additional feet. Optional Water Supply Installation Kits available. "BUILT-IN LOOK" SPECIFICATIONS • Minimum opening of 70-1/4" H x 36" W x 28-7/8" D required to allow for ease of installation, proper air circulation, and plumbing / electrical connections. • Remove all wall / floor molding prior to installation. Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes. Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca. Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FFSS2615T 09/17 © 2017 Electrolux Home Products, Inc.