Frigidaire FGAC5044W1 Complete Owners Guide - Page 9

Operating Instructions Fault Codes 1. If the display reads "AS" or "ES" , a sensor has failed. Contact your Authorized Frigidaire Service Center. 2.If the display reads "EC" , check the following operating conditions. Outlet voltage should be 115V±10% and the surrounding temperature should be with in the range of 41 °F to 89 °F. Unplug the unit and plug it in again under normal operating conditions. If the "EC" code persists, contact your Authorized Frigidaire Service Center. ,IWKHGLVSOD\UHDGV³(´WKHFRPPXQLFDWLRQEHWZHHQGLVSOD\3&%DQGPDLQFRQWURO3&%LVIDXOW\&RQWDFW\RXU Authorized Frigidaire Service Center. Removing Collected Water 1. Emptying the Bucket: a. When the bucket is full, the unit will shut down and the BUCKET FULL indicator will illuminate. b. Do not move the unit at this time otherwise water may spill on the floor. c. Press sides of bucket gently to unclip the bucket from the unit. d. Remove the bucket as shown in the photographs below and empty the bucket. WARNING Discard water from bucket. Water is not potable and cannot be used for drinking. 2019 Electrolux Home Products, Inc. All rights reserved. 9