Frigidaire FGET2745KF Complete Owner's Guide (English) - Page 11

Setting Minute Timer, Setting Add 1 Minute Feature, Setting Silent Control Operation

Page 11 highlights

Setting OVEN controls Setting Oven Lockout Feature The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Minute Timer or the interior oven lights. To activate the Oven Lockout feature 1. Press and hold for 3 seconds. 2. After 3 seconds "Loc" will appear, a beep will sound and "DOOR" will flash in the display. Once the oven door is locked the "DOOR" will stop flashing and remain on along with the "Loc" and the icon will appear. To reactivate normal oven operation: 1. Press and hold for 3 seconds. A beep will sound. The "DOOR" will flash in the display until the oven door has completely unlocked and the icon will disappear. 2. The oven is again fully operational. Setting Silent Control Operation The DELAY START and SELF CLEAN pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps. To change control from normal sound operation to silent control operation 1. To tell if your range is set for normal or silent operation press and hold DELAY START. "-- --" will appear and "DELAY" will flash in the display. After 6 seconds "bEEP On" or "bEEP OFF" will appear in the display. 2. Press SELF CLEAN to switch between normal sound operation and silent operation mode. The display will show either "bEEP On" or "bEEP OFF". Note: If "bEEP On" appears, the control will operate with normal sounds and beeps. If "bEEP OFF" appears, the control is in the silent operation mode. 3. Press START to accept the change or press CANCEL to reject the change. Note: The control will always beep at the end of a minute timer and will beep when a set temperature has been reached, even if the control is set to silent operation. Setting MINUTE Timer The TIMER ON.OFF pad controls the Minute Timer feature. The Minute Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Minute Timer feature can be used during any of the other oven control functions. Refer to "Minimum and Maximum Control Pad Settings" for time amount settings. To set the Minute Timer (example for 5 minutes) 1. Press TIMER ON.OFF. "-- --" will appear in the display. 2. Use the number pads to set the desired time in the display; press 5. 3. Press START. The time will begin to count down with "5:00" in the display. Note: If START is not pressed the timer will return to the time of day after 25 seconds. 4. When the set time has run out, "End" will show in the display. The clock will sound with 3 beeps every 5 seconds until TIMER ON.OFF is pressed. To cancel the Minute Timer before the set time has run out 1. Press TIMER ON.OFF. The display will return to the time of day. Setting Add 1 Minute Feature (some models) The ADD 1 MINUTE pad is used to set the Add 1 Minute feature. When the ADD 1 MINUTE pad is pressed, 1 minute is added to the Minute Timer feature if this feature is already active. If the Minute Timer feature is not active and the ADD 1 MINUTE pad is pressed, the Minute Timer feature will become active and will begin counting down from 1 minute. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

11
SETTING OVEN CONTROLS
SETTING MINUTE TIMER
The
TIMER ON
.
OFF
pad controls the Minute Timer feature.
The Minute Timer serves as an extra timer in the kitchen
that will beep when the set time has run out.
It does not
start or stop cooking. The Minute Timer feature can be
used during any of the other oven control functions. Refer
to “Minimum and Maximum Control Pad Settings” for time
amount settings.
To set the Minute Timer
(example for 5 minutes)
1. Press
TIMER ON
.
OFF.
-- --
” will appear in the
display.
2. Use the number pads to set the desired time in the
display; press
5
.
3. Press
START
. The time will begin to count down with
5:00
” in the display.
Note: If
START
is not pressed the timer will return to the
time of day after 25 seconds.
4. When the set time has run out, “
End
” will show in
the display. The clock will sound with 3 beeps every 5
seconds until
TIMER ON
.
OFF
is pressed.
To cancel the Minute Timer before the set time has
run out
1. Press
TIMER ON
.
OFF
. The display will return to the time
of day.
SETTING ADD 1 MINUTE FEATURE
(some
models)
The
ADD 1 MINUTE
pad is used to set the Add 1 Minute
feature. When the
ADD 1 MINUTE
pad is pressed, 1
minute is added to the Minute Timer feature if this feature
is already active. If the Minute Timer feature is not active
and the
ADD 1 MINUTE
pad is pressed, the Minute Timer
feature will become active and will begin counting down
from 1 minute.
SETTING OVEN LOCKOUT FEATURE
The
pad controls the Oven Lockout feature. The Oven
Lockout feature automatically locks the oven door and
prevents the oven from being turned on. It does not disable
the clock, Minute Timer or the interior oven lights.
To activate the Oven Lockout feature
1. Press and hold
for 3 seconds.
2.
After 3 seconds “
Loc
” will appear, a beep will sound and
DOOR
” will flash in the display. Once the oven door
is locked the “
DOOR
” will stop flashing and remain on
along with the “
Loc
” and the
icon will appear.
To reactivate normal oven operation:
1.
Press and hold
for 3 seconds. A beep will sound. The
DOOR
” will flash in the display until the oven door has
completely unlocked and the
icon will disappear.
2.
The oven is again fully operational.
SETTING SILENT CONTROL OPERATION
The
DELAY START
and
SELF CLEAN
pads control the
Silent Control operation feature. The Silent Control operation
feature allows the oven control to be operated without
sounds or beeps whenever necessary. If desired the control
can be programmed for silent operation and later returned
to operating with all the normal sounds and beeps.
To change control from normal sound operation to
silent control operation
1.
To tell if your range is set for normal or silent operation
press and hold
DELAY START
. “
-- --
” will appear and
DELAY
” will flash in the display.
After 6 seconds “
bEEP
On
” or “
bEEP OFF
” will appear in the display.
2. Press
SELF CLEAN
to switch between normal sound
operation and silent operation mode. The display will
show either “
bEEP On
” or “
bEEP OFF
”.
Note: If “
bEEP On
” appears, the control will operate with
normal sounds and beeps.
If “
bEEP OFF
” appears,
the control is in the silent operation mode.
3. Press
START
to accept the change or press
CANCEL
to reject the change.
Note:
The control will always beep at the end of a minute
timer and will beep when a set temperature has been reached,
even if the control is set to silent operation.