Frigidaire FGET2765KW Complete Owner's Guide (English) - Page 10

Setting OVEN controls Setting the Clock The SET CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash. To set the clock (example below for 1:30) 1. Press SET CLOCK. "CLO" will appear in the display. 2. Press 1 3 0 pads to set the time of day to 1:30. "CLO" will stay in the display. 3. Press START. "CLO" will disappear and the clock will start. Changing between 12 or 24 hour time of day display 1. Press and hold SET CLOCK for 6 seconds. "CLO" will appear in the display. 2. CONTINUE holding the pad until "12Hr dAY" or "24Hr dAY" appears in the display and the control beeps once. 3. Press SELF CLEAN to switch between the 12 and 24 hour time of day display. The display will show either "12Hr dAY" or "24Hr dAY". 4. Press START to accept the change or press CANCEL to reject the change. 5. Reset the correct time as described in To set the Clock above. Please note that if the 24 hour time of day mode was chosen, the clock will now display time from 0:00 through 23:59 hours. Setting Continuous Bake or 6 Hour Energy Saving The TIMER and SELF CLEAN pads control the Continuous Bake or 6 Hour Energy Saving features. The oven control has a factory preset built-in 6 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 6 hours. The oven can be programmed to override this feature for Continuous Baking. To set the control for Continuous Bake or 6 Hour Energy Saving features 1. Press and hold TIMER for 6 seconds. After 6 seconds "6Hr OFF" or "StAY On" will appear in the display and the control will beep once. 2. Press SELF CLEAN to switch between the 6 Hour Energy Saving and continuous bake features. Note: "6Hr OFF" in the display indicates the control is set for the 6 Hour Energy Saving mode and "StAY On" indicates the control is set for the Continuous Bake feature. 3. Press START to accept the change (display will return to time of day) or press CANCEL to reject the change. Setting Temperature Display - Fahrenheit or Celsius: The BROIL and SELF CLEAN pads control the Fahrenheit or Celsius temperature display modes. The oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to display in Fahrenheit. To change display from Fahrenheit to Celsius or Celsius to Fahrenheit 1. To tell if the display is set for Fahrenheit or Celsius press BROIL and hold it for 6 seconds; "550°" will appear and "BROIL" will flash in the display and a beep will sound. If "FAhrnht" appears, the display is set to show temperatures in Fahrenheit. If "CELSIUS" appears, the display is set to show temperatures in Celsius. 2. Press SELF CLEAN to switch between Fahrenheit or Celsius display modes. The display will show either "FAhrnht" or "CELSIUS". 3. Press START to accept the change or press CANCEL to reject the change. 10