Frigidaire FGGF3032KB Complete Owner's Guide (English) - Page 13

Setting the clock When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00". It is recommended to always set the clock for the correct time of day before using the appliance. To set the clock: 1. Press once (do not hold pad down). 2. Within 5 seconds, press and hold the or until the correct time of day appears in the display. NOTE The clock cannot be changed during any timed bake or self-clean cycle. Changing between continuous bake setting or 12-Hour Energy Saving feature The oven control has a built-in 12-Hour Energy Saving feature that will shut off the oven if the control is left on for more than 12 hours. The oven can be programmed to override this feature for continuous baking. Changing to continuous bake setting: 1. Press and hold down for 5 seconds until tone is heard, " - - hr" will appear in display for continuous cooking. The current time of day will return to the display. 2. To cancel the continuous bake setting, press and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12-Hour Energy Saving feature. SETTING OVEN CONTROLS Changing temperature display (°F or °C) The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C). To change the temperature to display °C (Celsius) or from °C to °F (control should not be set for Bake or Self-clean when setting this feature): 1. Press . "- -" appears in the display. 2. Press and hold the display. until "HI" appears in the 3. Press and hold display. until °F or °C appears in the 4. Press the or to change °F to °C or °C to °F. 5. Press any control pad to return to normal operating mode. Setting a silent control panel When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for silent operation. Press and hold . After 7 seconds, the control will beep once. This will block the controls from sounding when a pad is pressed. To return the sound, press and hold the control beeps once. again for 7 seconds until NOTE The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the preheat indicator light turns OFF, your oven is ready. 13