Frigidaire FGHS2655PF Use and Care Manual - Page 19

CAUTION, Cleaning the Ice Maker

Page 19 highlights

AUTOMATIC ICE & WATER DISPENSER Cleaning the Ice Maker Clean the ice maker and ice bin at regular intervals, particularly before you take a vacation or move. To clean the ice maker: 1 Turn Off the ice maker. 2 Remove the ice bin by lifting up and out. 3 Empty and carefully clean the ice bin with mild detergent. Rinse with clear water. Do not use harsh or abrasive cleaners. 4 Allow the ice bin to dry completely before replacing in the freezer. 5 Remove ice chips and clean the ice bin shelf and the freezer door chute. 6 Replace the ice bin. Turn On the ice maker to resume ice production. Remove and empty the ice storage bin if: • An extended power failure (one hour or longer) causes ice cubes in the ice storage bin to melt and freeze together, jamming the dispenser mechanism. • You do not use the ice dispenser frequently. Ice cubes will freeze together in the bin, jamming the dispenser mechanism. Remove the ice storage bin and shake to loosen the cubes or clean as explained above. Auger CAUTION NEVER use an ice pick or similar sharp instrument to break up the ice. This could damage the ice storage bin and dispenser mechanism. IMPORTANT When removing or replacing the ice bin, DO NOT rotate the auger in the ice bin. If the auger is accidentally rotated, you must realign the auger by turning it in 90 degree turns (see below) until the ice bin fits into place with the drive mechanism. If the auger is not properly aligned when replacing the ice bin, the refrigerator will only dispense Crushed Ice. The freezer door may also not close properly causing warm air to leak into the freezer. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

19
Auger
CAUTION
NEVER use an ice pick or similar sharp
instrument to break up the ice. This could
damage the ice storage bin and dispenser
mechanism.
IMPORTANT
When removing or replacing the ice bin,
DO NOT rotate the auger in the ice bin. If
the auger is accidentally rotated, you must
realign the auger by turning it in 90 degree
turns (see below) until the ice bin fits into
place with the drive mechanism.
If the
auger is not properly aligned
when
replacing the ice bin, the refrigerator will
only dispense Crushed Ice. The freezer door
may also not close properly causing warm
air to leak into the freezer.
Cleaning the Ice Maker
Clean the ice maker and ice bin at regular
intervals, particularly before you take a
vacation or move.
To clean the ice maker:
1
Turn
Off
the ice maker.
2
Remove the ice bin by lifting up and out.
3
Empty and carefully clean the ice bin with
mild detergent. Rinse with clear water. Do
not use harsh or abrasive cleaners.
4
Allow the ice bin to dry completely before
replacing in the freezer.
5
Remove ice chips and clean the ice bin
shelf and the freezer door chute.
6
Replace the ice bin. Turn
On
the ice maker
to resume ice production.
Remove and empty the ice storage bin if:
An extended power failure (one hour or
longer) causes ice cubes in the ice storage
bin to melt and freeze together, jamming
the dispenser mechanism.
You do not use the ice dispenser frequently.
Ice cubes will freeze together in the bin,
jamming the dispenser mechanism.
Remove the ice storage bin and shake to
loosen the cubes or clean as explained above.
AUTOMATIC ICE & WATER DISPENSER