Frigidaire FGIC3666TB Wiring Diagram - Page 6
Cooktop Installation, Checking Operation, Before You Call for Service - dimensions
View all Frigidaire FGIC3666TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
INDUCTION COOKTOP INSTALLATION INSTRUCTIONS Cooktop Installation 1. Visually inspect the cooktop for damage. Also make sure all cooktop screws are tight (see Figure 7). WARNING Do not remove the spring spacers on the edges of the cooktop. These spacers center the cooktop in the space provided. The cooktop must be centered to prevent excess heat buildup that may result in heat damage or fire (see Figure 10). 4. Fix the cooktop to the bracket using the screws supplied (see Figure 10). Hole located under the burner box to fix the retainer bracket. Spring Spacer (8) Screws Figure 7 2. Install the retainer brackets. See Figure 8. The retainer brackets MUST be installed, to meet local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70-latest edition (see Figure 8). Cooktop Countertop Spring Spacer 2mm Retainer Bracket Figure 8 3. Set the cooktop into the countertop cutout. Position brackets on unit cutout center line Retainer bracket (2) as shown. Figure 10 Granite countertop Installation Kit A Granite Countertop Installation kit # 903061-9010 can be ordered through a Service Center or by phone at 1-877ELECTROLUX (1-877-435-3287). Checking Operation Refer to the Use and Care Guide for operation. CAUTION Do not touch cooktop glass or elements. They may be hot enough to burn you. Before You Call for Service Read the Before You Call for Service Checklist and operating instructions in your Use and Care Guide. It may save you time and expense. The list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Refer to your Use and Care Guide for service phone numbers. A B Figure 9 During the installation with a wide cutout make sure the cooktop is centered. A and B gap should have the same dimensions. The elongated holes on the bottom of the installation brackets are made to fit every cutout. 6