Frigidaire FGMC2766UF Product Specifications Sheet - Page 3

Installation Specifications, Microwave Combination Oven - model

Page 3 highlights

FGMC2766U D/F MICROWAVE COMBINATION OVEN 27" ELECTRIC 27 1/8" min. 27" 115/16" 42 4/5" (includes 1" bottom trim) 1" min. 24 5/8" Spacer 40 1/5" Power supply location (middle bottom rear) 41 1/8" min. 41 1/4" max. 24 7/8" min. 25 1/4" max. 2"-wide wood spacers (if needed)** 23 3/4" min.* (critical dimension) 4" x 4" opening to route armored cable (right or left side depending on model) Full base required to support 225 lbs. Allow at least 21" clearance for door depth when open 24 3/4" *Critical dimension - MUST be applied 111/2" suggested distance 4 1/2" min. required 3" max. Electrical 1 1/4" junction box min. location (right or left side) INSTALLATION SPECIFICATIONS • Product Shipping Weight (approx.) - 275 Lbs. • Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line. • Connected Load (kW Rating) @ 240 / 208 Volts = 7.9/5.9 kW • Amps @ 240 / 208 Volts = 30.38 / 35.25 Amps • Recommended Circuit Breaker - 30 Amps • Always consult local and national electric codes. • Minimum 21" clearance for oven door depth when open. • Suggested distance from floor is 11-1/2". Minimum required distance is 4-1/2". • To adapt Microwave Combination Oven to fit cutout height greater than 41-11/16", add one 2"-wide wood shim of appropriate height to each side of opening under oven side rails. Lifting oven will hide larger cutout opening at top and oven's 1"-high bottom trim will hide shims at bottom. (Standard 1"-High Bottom Trim included.) • To adapt Microwave Combination Oven to fit cutout height greater than 42-3/16", optional 3"-High Bottom Trim available. • Minimum 24" deep cutout dimension is critical for proper installation, to ensure that oven's faceplate will fit flush against cabinet front. • Full oven base of solid plywood or similar material required, capable of supporting 225 Lbs. • Base must be level and cabinet front must be square. • Microwave Combination Ovens are NOT approved to be used in stackable or side-by-side installation. OPTIONAL ACCESSORIES • 3"-High Stainless Steel Bottom Trim - (PN # 5304520626). • 3"-High Black Stainless Bottom Trim - (PN # 5304520622). • 10'-Long Armored Power Cable - (PN # 903056-9010). Note: For planning purposes only. Always consult local and national electric, gas and plumbing codes. Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca. Specifications subject to change. Accessories information available on the web at frigidaire.com / frigidaire.ca USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca FGMC2766U 02/19 © 2019 Electrolux Home Products, Inc.

  • 1
  • 2
  • 3

INSTALLATION SPECIFICATIONS
Product Shipping Weight (approx.) – 275 Lbs.
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only
electrical supply with ground required on separate circuit fused on both sides
of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 7.9/5.9 kW
Amps @ 240 / 208 Volts = 30.38 / 35.25 Amps
Recommended Circuit Breaker – 30 Amps
Always consult local and national electric codes.
Minimum 21" clearance for oven door depth when open.
Suggested distance from floor is 11-1/2". Minimum required distance is 4-1/2".
To adapt Microwave Combination Oven to fit cutout height greater than
41-11/16", add one 2"-wide wood shim of appropriate height to each side of
opening under oven side rails. Lifting oven will hide larger cutout opening
at top and oven’s 1"-high bottom trim will hide shims at bottom.
(Standard
1"-High Bottom Trim included.)
To adapt Microwave Combination Oven to fit cutout height greater than
42-3/16", optional 3"-High Bottom Trim available.
Minimum 24" deep cutout dimension is critical for proper installation, to ensure
that oven’s faceplate will fit flush against cabinet front.
Full oven base of solid plywood or similar material required, capable of
supporting 225 Lbs.
Base must be level and cabinet front must be square.
Microwave Combination Ovens are NOT approved to be used in stackable or
side-by-side installation.
OPTIONAL ACCESSORIES
3"-High Stainless Steel Bottom Trim – (PN # 5304520626).
3"-High Black Stainless Bottom Trim – (PN # 5304520622).
10'-Long Armored Power Cable – (PN # 903056-9010).
Specifications subject to change.
Accessories information available on the web at
frigidaire.com / frigidaire.ca
Note:
For planning purposes only. Always consult local and national electric, gas and plumbing codes.
Refer to Product Installation Guide for detailed installation instructions on the web at frigidaire.com / frigidaire.ca.
USA
10200 David Taylor Drive
Charlotte, NC 28262
1-800-FRIGIDAIRE
frigidaire.com
CANADA
5855 Terry Fox Way
Mississauga, ON L5V 3E4
1-800-265-8352
frigidaire.ca
*Critical dimension – MUST be applied
3" max.
1
1
/
4
"
min.
1"
min.
11
1
/
2
"
suggested
distance
4
1
/
2
"
min.
required
41
1
/
8
"
3
/
4
"
min.
41
1
/
4
"
max.
Full base
required
to support
225 lbs.
27
1
/
8
"
min.
4" x 4"
opening
to route
armored
cable (right
or left side
depending
on model)
24
7
/
8
"
min.
25
1
/
4
"
max.
23
min.
*
(critical
dimension)
2"-wide
wood spacers
(if needed)**
Electrical
junction box
location (right
or left side)
Spacer
24
5
/
8
"
42
4
/
5
"
(includes
1"
bottom
trim)
1
15
/
16
"
24
3
/
4
"
27"
40
1
/
5
"
Allow at least
21" clearance
for door depth
when open
Power
supply
location
(middle
bottom
rear)
FGMC2766U 02/19
© 2019 Electrolux Home Products, Inc.
FGMC2766U D/F
MICROWAVE COMBINATION OVEN
27" ELECTRIC