Frigidaire FPID2498SF Complete Owner s Guide - Page 7

OPERATING INSTRUCTIONS User Instruction Code Instruction Code Displayed Close door Problem Solution This indicates the door has been left open or not properly latched. Ensuring the door is properly latched will clear the display. This does not indicate a problem with your dishwasher and service will not need to be contacted. Error Codes Displayed Error Code* Problem Solution i10 A low fill has been Look for a pinched water supply line, or water shutoff is detected. not completely opened. i20; Clogged filters or a Check and clean both filters and sump area and check i40; restricted drain line for a pinched or blocked drain hose. If the drain line is iF0 has been detected. attached to a disposer, check that the knockout plug has been removed. i30 A leak or overflow Look for loose connections at the water inlet valve and of water has been ensure the unit is properly leveled. detected in the bottom pan. i50 A problem has been detected with the Pressing the cancel button or turning power off at the drain or wash motor. breaker for 5 min. should clear this error code and the i60 A problem has been unit can be restarted. detected with the water heating system. If this does not resolve the problem, service iC0 A problem has been will need to be called. detected with the electronic control system. *In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5 min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-9044. 7