Frigidaire FRT18S6AW Use and Care Guide - Page 12

Looking Inside To avoid personal injury or property damage, handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change. SHELF ADJUSTMENT Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting the shelves, remove all food. To adjust sliding shelves: 1 Remove shelf by pulling forward to stop position. 2 Lift front edge up and pull out. Replace the shelf on any pair of rails by reversing this procedure. To adjust cantilever shelves: NOTE: Cantilever shelves are supported at the back of the refrigerator. Cantilever shelves are available in either glass or wire. 1 Lift front edge up. 2 Pull shelf out. Replace the shelf by inserting the hooks at rear of the shelf into the wall bracket. Lower the shelf into the desired slots and lock into position. SpillSafeTM glass shelves (some models) catch and hold accidental spills. In some models, the SpillSafeTM shelves slide out for easy access to food and for fast cleaning. The shelves slide out independently of the cantilever brackets. Just pull the front of the shelf forward. The shelf can be extended as far as the stopper will allow but it is not removable from the cantilever bracket. Sliding Wire Shelf Sliding Glass Shelf Full Width Cantilever Glass Shelf Cantilever Glass Shelf - Fixed and Sliding 12