Fujitsu A1220 A1220 Getting Started Guide - Page 3
Initial Start Up - battery
View all Fujitsu A1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Initial Start Up Display Panel Latch Button DC In AC Adapter AC Cable 1. Open the Display Panel • Ensure that your LifeBook is on a hard level surface and that the air vents are not blocked. • Lift the display, being careful not to touch the screen. • Adjust the display until it is at a comfortable viewing angle. 2. Connect AC Power • Plug the power cord into the AC adapter. • Plug the AC adapter into your notebook. • Connect the power cord to an electrical outlet. 3. Connect to Internet or Network • Connect an Ethernet cable to the LAN jack on your notebook and to a wall jack or connect to a wireless Ethernet router by sliding the wireless LAN switch to on. Important: • During the setup procedure, do not disconnect the power supply, press any buttons, or use any peripheral devices such as a mouse, keyboard, or remote control. • You should not attach any external devices and do not put a DVD/CD in your drive until you have gone through the initial power on sequence. 4. Booting the System The Lithium ion battery is not charged upon purchase. Initially you will need to connect either the AC adapter or the Auto/Airline adapter to use your notebook. Wall Jack • P ress the Power Suspend/Resume/button (above the keyboard) to turn on the notebook. When you do this for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin. Connecting LAN Device 5. Register • Accept the Microsoft® Windows® Licensing Agreement and the Fujitsu End User License Agreement to proceed. • Select your User ID and Password during the "Welcome Screen." • Keep a record of your User ID and password stored in a secure place. • THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO MINUTES. • Do not attempt to turn power on or off during this stage. 6. Registering Your LifeBook notebook • Register your notebook with Fujitsu Service and Support via our website at us.fujitsu.com/computers. • You will need to be set up with an Internet Service Provider (ISP) to register online. Wireless LAN On/Off Switch Power/Suspend/ Resume Button 7. Installing Click Me! • Check to be sure the WLAN switch is on. In addition to an icon on the desktop, a dialog box will automatically open that prompts you to run Click Me!. If you choose not run ClickMe! at this time, the ClickMe! icon will remain on your desktop. • When you click the Click Me! icon, your system will automatically build the icon tray in the bottom right of the screen. These icons provide links to utilities that you will frequently access. • For the latest drivers, please go to http://www.fujitsu.com/us/ (For Additional Utilities) (For support/ and follow the links to the downloads. Latest Drivers) • If the FDU Icon is missing from Windows® taskbar notification area, please download and install FDU package from the support website. This application will keep your notebook "Click Me!" (FDU) up to date with the latest released drivers. 3