Fujitsu A6110 Remote Control User's Guide - Page 6
Connecting optical remote control IR receiver, Setting up Mobility Center to use remote control
UPC - 611343080798
View all Fujitsu A6110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connecting optical remote control IR receiver In order to allow a suspended system to "wake up" using the remote control, you must ensure that it is enabled in the Windows Mobility Center. To do so, follow the instructions in "Setting up Mobility Center to use remote control" on page 6. Connect the USB connector on the end of the remote control to one of the USB ports on your computer (Figure 7). Note that the location of the USB port on your system may not be the same as that shown in the figure. Refer to the system user's guide for the location of the USB ports. Figure 6. Connecting the optical remote control receiver Setting up Mobility Center to use remote control In order for your remote control to work with your LifeBook, you must first ensure that it is able to "wake up" using a USB device. To do so, perform the following simple steps: 1. Click on Start -> Control Panel. 2. If you are in Classic View, double-click the Windows Mobility Center icon. If you are in Control Panel Home View, first click Mobile PC, then select Windows Mobility Center. 6